After you configured your interfaces, did you default your Outbound and Remote Access filters? If not, you should.
Mike Burden Lynk Systems http://www.lynk.com (616)532-4985 [EMAIL PROTECTED] > -----Original Message----- > From: The Shea's [mailto:[EMAIL PROTECTED]] > Sent: Saturday, March 16, 2002 3:39 PM > To: [EMAIL PROTECTED] > Subject: [gb-users] New - Need help > > > I recently downloaded the Lite version and installed it on a > machine I'm > using to protect a small home network. Although I'm a > competent network and > firewall administrator and even though the GNAT box admin > interface is not > very difficult I was unable to get the box totally functional. > > I was able to get the box to obtain an address from my ISP > (DHCP). I was > also able to figure out how to register it and how to get the > serial number > and feature codes updated (not the easiest thing if you > misread the email > <grin>). I was also able to get the admin program to connect and make > configuration changes to the box. > > Here are the things that I was unable to do: > > 1) Get basic DNS requests to flow to/through the box. > 2) Find any way to use the box as a DHCP server on my local > subnet. (This > was not essential - but the help seems to indicate that this > is a feature of > the software.) > > Also, after failing with the lite version I downloaded the > demo copy and I > was not any more successful with it. I do not have a comlex > setup - basic > cable modem with DHCP on the ISP side and a small hub with a > few clients on > the back side. No DMZ and no port forwarding required. > > What am I missing? > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > To subscribe to the digest version first unsubscribe, then > e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] To subscribe to the digest version first unsubscribe, then e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
