http://support.microsoft.com/kb/315223
and if you are running raid, and a new driver was updated/installed you may need to revert to the old driver, but start with the memory tests first, if that checks out, then troubleshoot your raid if you have one. Bill Burns wrote: > I agree... Raid Controllers usually go out on reboots. > > Bill > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf > Of David St John > Sent: Tuesday, January 08, 2008 9:54 PM > To: [email protected] > Subject: Re: [General-discussion] here is my proof > > I would have to concure with James, > download http://www.memtest86.com/download.html > burn it to cd using nero or alcohol 120% via the image burn features. > then plop it in a boot up to that cd and run the tests, it should > autostart the tests, if you see any errors anywhere on the test scree > under the error column, this means you will need to replace your current > > memory. > If you have more the one stick of memory running in dual channel, you > will need to yank out one of the sticks and test each one to figure out > wich one is bad. > > Hope that helps. > > James Henline wrote: >> This line. >> >> NMI: Parity check / memory partiy error >> >> Makes me think you may have a bad stick of memory. >> >> James Henline. >> Help Desk Manager >> Development Manager >> Spacial Audio Solutions LLC. >> 972-739-6420 ext: 110 >> www.audiorealm.com >> www.spacialnet.com >> www.spacialaudio.com >> >> CONFIDENTIALITY NOTICE: This email, including any attachments, > contains >> information from SpacialAudio Solutions LLC., which may be > confidential or >> privileged. The information is intended to be for the use of the > individual >> or entity named above. If you are not the intended recipient, be aware > that >> any disclosure, copying, distribution or use of the contents of this >> information is prohibited. If you have received this email in error, > please >> notify the sender immediately by "reply to sender only" message and > destroy >> all electronic and hard copies of the communication, including > attachments. >> >> >> -----Original Message----- >> From: [email protected] >> [mailto:[email protected]] On Behalf > Of >> David St John >> Sent: Tuesday, January 08, 2008 9:35 PM >> To: Dj Liqid Touch; [email protected] >> Subject: Re: [General-discussion] here is my proof >> >> More then likely is a update from microsoft or a recent driver update. >> >> Do you have a raid card enabled on that machine? >> >> Dj Liqid Touch wrote: >>> no one can tell me anything different. >>> >>> My SAM machine just crashed and it has been running fine since the >>> last time it crash ( as per my last message to the list) >>> >>> Today it did a windows update. >>> It was still set to do them automatically >>> >>> sure enough i hear it freezing, i turn to the right to see the screen > >>> and theres the damb window that a windows update just completed. >>> Now my machine wont startup at all >>> >>> i have this error on the BLUE screen >>> >>> ***HARDWAERE MALFUNCTION*** >>> Call your hardware vendor for support >>> NMI: Parity check / memory partiy error >>> *** The system has halted*** >>> >>> >>> >>> someone want to tell me again that this isnt being caused to all of > us >>> from windows updates? >>> _______________________________________________ >>> General-discussion mailing list >>> [email protected] >>> http://mailman.spacialaudio.com/mailman/listinfo/general-discussion >>> >>> TO unsubscribe to this list, simply send a blank email to >>> [email protected] >>> >>> with the subject 'unsubscribe' >>> >> _______________________________________________ >> General-discussion mailing list >> [email protected] >> http://mailman.spacialaudio.com/mailman/listinfo/general-discussion >> >> TO unsubscribe to this list, simply send a blank email to >> [email protected] >> >> with the subject >> 'unsubscribe' >> >> _______________________________________________ >> General-discussion mailing list >> [email protected] >> http://mailman.spacialaudio.com/mailman/listinfo/general-discussion >> >> TO unsubscribe to this list, simply send a blank email to >> [email protected] >> >> with the subject >> 'unsubscribe' >> > _______________________________________________ > General-discussion mailing list > [email protected] > http://mailman.spacialaudio.com/mailman/listinfo/general-discussion > > TO unsubscribe to this list, simply send a blank email to > [email protected] > > with the subject > 'unsubscribe' > > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.5.516 / Virus Database: 269.17.13/1212 - Release Date: > 1/6/2008 10:55 PM > > > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.5.516 / Virus Database: 269.17.13/1212 - Release Date: > 1/6/2008 10:55 PM > > > _______________________________________________ > General-discussion mailing list > [email protected] > http://mailman.spacialaudio.com/mailman/listinfo/general-discussion > > TO unsubscribe to this list, simply send a blank email to > [email protected] > > with the subject > 'unsubscribe' > -- ^^_ o" )~ '''' Spacial Audio Network Administrator/Developer David St. John Get Spacial Power! visit us online today. http://www.spacialaudio.com http://www.spacialnet.com http://www.audiorealm.com From [email protected] Tue Jan 8 22:27:27 2008 From: [email protected] (Dj Liqid Touch) Date: Tue Jan 8 23:06:26 2008 Subject: [General-discussion] here is my proof References: <000e01c85267$d6d87c00$6701a...@ericacer5100> <[email protected]><012f01c8526a$61c1a1f0$2544e5...@com> <[email protected]> Message-ID: <0f3901c8526f$9322ad70$6701a...@ericacer5100> i dont have either one of these programs (nero / Alcohol ) ----- Original Message ----- From: David St John To: [email protected] Sent: Tuesday, January 08, 2008 9:53 PM Subject: Re: [General-discussion] here is my proof I would have to concure with James, download http://www.memtest86.com/download.html burn it to cd using nero or alcohol 120% via the image burn features. then plop it in a boot up to that cd and run the tests, it should autostart the tests, if you see any errors anywhere on the test scree under the error column, this means you will need to replace your current memory. If you have more the one stick of memory running in dual channel, you will need to yank out one of the sticks and test each one to figure out wich one is bad. Hope that helps. James Henline wrote: > This line. > > NMI: Parity check / memory partiy error > > Makes me think you may have a bad stick of memory. > > James Henline. > Help Desk Manager > Development Manager > Spacial Audio Solutions LLC. > 972-739-6420 ext: 110 > www.audiorealm.com > www.spacialnet.com > www.spacialaudio.com > CONFIDENTIALITY NOTICE: This email, including any attachments, contains > information from SpacialAudio Solutions LLC., which may be confidential or > privileged. The information is intended to be for the use of the > individual > or entity named above. If you are not the intended recipient, be aware > that > any disclosure, copying, distribution or use of the contents of this > information is prohibited. If you have received this email in error, > please > notify the sender immediately by "reply to sender only" message and > destroy > all electronic and hard copies of the communication, including > attachments. > > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of > David St John > Sent: Tuesday, January 08, 2008 9:35 PM > To: Dj Liqid Touch; [email protected] > Subject: Re: [General-discussion] here is my proof > > More then likely is a update from microsoft or a recent driver update. > > Do you have a raid card enabled on that machine? > > Dj Liqid Touch wrote: >> no one can tell me anything different. >> >> My SAM machine just crashed and it has been running fine since the last >> time it crash ( as per my last message to the list) >> >> Today it did a windows update. >> It was still set to do them automatically >> >> sure enough i hear it freezing, i turn to the right to see the screen and >> theres the damb window that a windows update just completed. >> Now my machine wont startup at all >> >> i have this error on the BLUE screen >> >> ***HARDWAERE MALFUNCTION*** >> Call your hardware vendor for support >> NMI: Parity check / memory partiy error >> *** The system has halted*** >> >> >> >> someone want to tell me again that this isnt being caused to all of us >> from windows updates? >> _______________________________________________ >> General-discussion mailing list >> [email protected] >> http://mailman.spacialaudio.com/mailman/listinfo/general-discussion >> >> TO unsubscribe to this list, simply send a blank email to >> [email protected] >> >> with the subject 'unsubscribe' >> > _______________________________________________ > General-discussion mailing list > [email protected] > http://mailman.spacialaudio.com/mailman/listinfo/general-discussion > > TO unsubscribe to this list, simply send a blank email to > [email protected] > > with the subject > 'unsubscribe' > > _______________________________________________ > General-discussion mailing list > [email protected] > http://mailman.spacialaudio.com/mailman/listinfo/general-discussion > > TO unsubscribe to this list, simply send a blank email to > [email protected] > > with the subject 'unsubscribe' > _______________________________________________ General-discussion mailing list [email protected] http://mailman.spacialaudio.com/mailman/listinfo/general-discussion TO unsubscribe to this list, simply send a blank email to [email protected] with the subject 'unsubscribe'
