On Saturday 06 December 2003 10:46 am, Mark Knecht wrote:
> On Sat, 2003-12-06 at 08:22, Ernie Schroder wrote:
> >     This machine (Athlon XP-2100/512Megs RAM Leadtech K7NCR18D Pro
> > board) is still crashing. the average uptime has been about 5
> > hours.
> >
> > Other possible solutions would be appreciated.
>
> Hi Ernie,
>    Sorry it's still happening for you. It is for me also. We have
> similar systems. I'm using an A7V333-X MB, Athlon-XP 2600+, 512MB.
> I have determined that I cannot run this reliably right now with
> SetiAtHome running. Once I stopped that (I do use it on 3 other
> Gentoo boxes) my crashes decreased but did not go away. I'm
> crashing once a day now.

Ihad been running gtk-gnutella constantly both before and after the 
crashes started, but no [EMAIL PROTECTED] With gnutella not running crashes 
are still happening at about the same rate.
>
>    Just in the last few days I started having some strange video
> stuff happening when I first boot the machine in the morning. It
> stops in a few minutes, so I'm thinking that may be a temperature
> related problem with the video card. I have stopped leaving the
> machine unattended in X, meaning log out and don't use
> xscreensaver, and I have only had one crash in the last 3 days.

Good point, but not likely my problem. The GeForce 4 is running at 
about 100 Degrees F and the fan is running fine. I've disabled 
screensavers as well.
>
>    I'm going to dig in a bit this weekend and maybe swap video
> cards around between machines and see what happens. I'm hoping my
> problem is this card going bad and I'll just end up replacing that
> as opposed to the MB. 

I might try swapping some hardware myself, but the fact that Knoppix, 
Overclockix and Windowmaker all seem stable makes me think that KDE 
is the problem
>
>    Give some thought to what hardware you might be able to swap
> between machines. If you crash every few hours it should be pretty
> easy to find which one, if any, is the root cause of a hardware
> related crash.

Thanks for the input Mark
>
> Good luck,
> Mark
>
>
> --
> [EMAIL PROTECTED] mailing list

-- 
Regards, Ernie
100% Microsoft and Intel free


--
[EMAIL PROTECTED] mailing list

Reply via email to