Thanks Thomas,
The pieces are taking their places in the puzzle.
> ----------
> De: Austin Exploration[SMTP:[EMAIL PROTECTED]]
> Responder a: [EMAIL PROTECTED]
> Enviado el: lunes 12 de junio de 2000 6:22
> Para: [EMAIL PROTECTED]
> Asunto: Re: [geonet]: Windows NT4
>
> The pagefile.sys is your swap file. You may change it to what ever size
> you
> wish in the Control Panel. It is also called virtual memory. Windows NT
> will
> set it for you but if you feel that you need to increase it you may do it
> manually in the Control Panel by doing the following:
>
> 1. Click start to access the control panel.
> 2. Once you have the control panel open, double-click the System icon
> (picture of computer,monitor,mouse,keyboard).
> 3. Click the Perfomance folder.
> 4. You will see a title that says Vitural Memory and a brief description
> saying Total paging file size of all disk volumes.
> 5. If you want to change the the size of the Virtual Memory, click change.
> 6. You can change the virtual memory on any of your drives.
>
> Just remember you must be in administrator mode to make the change and
> then
> you need to reboot the computer it order to the change to take affect.
>
> Sincerely,
>
> Thomas Garcia
> ----- Original Message -----
> From: "Ricardo Castillo Torres" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Monday, June 12, 2000 6:21 PM
> Subject: RE: [geonet]: Windows NT4
>
>
> > Thanks Marc,
> >
> > I have NT 4.0 SP3 and 2 hard disk 2Gb and 4Gb, the partition are one of
> 1
> GB
> > identified C for software, and other D 5 GB for data. Unit C had 350 MB
> free
> > and unit D 170 Mb free. I installed Easy CD Creator de Luxe for backing
> up
> > data on a CD Yamaha. I start the program with option test first and
> write
> > after testing, the testing was successfull but when start to write it
> showed
> > messages about the files were not in the addresses. The execution was
> > finished and looked for the files that were not there, I surprised
> because
> > the files were there but I could not see them, the message was a problem
> > with pagination. Restart the PC and finally could see the files and
> could
> > breath. But the free space in unit C was reduce to 170 Mb, my question
> is:
> > What happend that reduced the free space on unit C, from 350 to 170?
> > I did not notice before a file named pagefile.sys very big, the size in
> y
> PC
> > is 142 MB. I suppesed this file is important.
> >
> > Thanks for your help.
> >
> > > Ricardo Castillo Torres
> > > Minera del Norte S. A. de C. V.
> > > Geophysicist
> > E-Mail: [EMAIL PROTECTED]
> >
> >
> > > ----------
> > > De: Marc Pelletier[SMTP:[EMAIL PROTECTED]]
> > > Responder a: [EMAIL PROTECTED]
> > > Enviado el: lunes 12 de junio de 2000 10:22
> > > Para: [EMAIL PROTECTED]
> > > Asunto: Re: [geonet]: Windows NT4
> > >
> > > At 12:20 PM 12 06 00 -0400, you wrote:
> > > >Hello everyone,
> > > >Someone know an e-mail address of Microsoft for tecnical support.
> > > >
> > > >Thank you
> > > >Ricardo Castillo Torres
> > > >Minera del Norte S. A. de C. V.
> > > >Geophysicist
> > > >E-Mail: [EMAIL PROTECTED]
> > > >
> > > >_______________________________________________________
> > > >More mailing list info
> http://www.geosoft.com/support/listserv/index.html
> > >
> > > Ricardo,
> > >
> > > Unless you have a fairly new, retail version of NT you will have to
> pay
> > > them for the support. Better to ask your questions here, if it's
> fairly
> > > simple, or on one of the NT newsgroups. Lots of people on this group
> use
> > > NT, like me, and we can probably sort you out.
> > >
> > > If all else fails you can find the Microsoft technical support stuff
> on
> > > their web site somewhere. If your computer came loaded with NT the
> > > retailer is responsible for supporting it.
> > >
> > > Cheers
> > >
> > > Marc Pelletier
> > >
> > >
> >
> >
> --------------------------------------------------------------------------
> > > -
> > > Data Donkey - Geophysical Data Processing, Consulting and Software
> > > Development
> > > Creator of the POWER TOOLBOX utilities for OASIS
> montaj
> > > contact: mailto:[EMAIL PROTECTED] tel (306) 931-6853 or
> > > http://www.datadonkey.com
> > >
> > > _______________________________________________________
> > > More mailing list info
> http://www.geosoft.com/support/listserv/index.html
> > >
> > _______________________________________________________
> > More mailing list info
> http://www.geosoft.com/support/listserv/index.html
> >
>
> _______________________________________________________
> More mailing list info http://www.geosoft.com/support/listserv/index.html
>
_______________________________________________________
More mailing list info http://www.geosoft.com/support/listserv/index.html
