Hi Jeff Thanks a lot, I did have some old files in the gx and bin folders. Euler seems to be working fine now.
Cheers, Doug On Thu, Aug 29, 2013 at 3:00 PM, Bundalo, Neda (MRO) < [email protected]> wrote: > Thanks Jeff!**** > > Neda**** > > ** ** > > *From:* [email protected] [mailto:[email protected]] *On > Behalf Of *Phillips, Jeffrey > *Sent:* Thursday, August 29, 2013 4:26 PM > > *To:* Geosoft Oasis montaj and Target > *Subject:* Re: [geonet] USGS Gxs**** > > ** ** > > When using version 8 of the USGS GXs, make sure you don't have any old > usgs_* files in gx and bin directories under \Program Files > (x86)\Geosoft\Oasis montaj\.**** > > All usgs_* files should be in the gx and bin directories under \Program > Files (x86)\Geosoft\Oasis montaj\resourcefiles.**** > > ** ** > > I discovered some old usgs_ files on my system, and they were giving me > the same bad post file behavior you describe.**** > > ** ** > > - Jeff Phillips**** > > ** ** > > On Thu, Aug 29, 2013 at 2:43 PM, Ed Cunion <[email protected]> wrote:** > ** > > Hi Doug,**** > > **** > > Using OM 8.1, the latest. **** > > **** > > yes, you place the files in the directories as advised including the lib1 > directory. To get the good PST files output, the paths were changed in > Windows to match the updated USGS directory structure. **** > > **** > > *From:* Doug Perkin <[email protected]> **** > > *Sent:* Thursday, August 29, 2013 2:24 PM**** > > *To:* Geosoft Oasis montaj and Target <[email protected]> **** > > *Subject:* Re: [geonet] USGS Gxs**** > > **** > > Hi Ed**** > > **** > > Thanks for your reply. I looked at the readme file for the new USGS OM8 > and then put the files in the directories that were specified there. The > main difference if I remember correctly is that all the folders for bin, > ohm, etc... are in a folder called resourcefiles now in version 8.0. **** > > So you are having success with all the new Gxs? Are you using OM 8.1 or > 8.0? The only ones that seem to work for me are the ones that don't require > .pst files like RTP calculation or upward continuation. I have had some > other problems so am considering either reinstalling 8.0 or updating to 8.1. > **** > > **** > > Cheers,**** > > Doug**** > > ** ** > > On Thu, Aug 29, 2013 at 1:01 PM, Ed Cunion <[email protected]> wrote:** > ** > > Are the Windows environment variables/path set up for the new USGS OM8 > compile? These changed for the new USGS compile. I’m getting good PST files > with the new compile, when the older ver 7 compile produced PST file > errors. **** > > **** > > *From:* Doug Perkin <[email protected]> **** > > *Sent:* Wednesday, August 28, 2013 3:13 PM**** > > *To:* Geosoft Oasis montaj and Target <[email protected]> **** > > *Subject:* [geonet] USGS Gxs**** > > **** > > Hi**** > > Has anyone been using the USGS Gxs that were updated for Oasis montaj > 8.0. I just downloaded them and am still running into problems with the > .pst files. The magnetic source from special function and euler > deconvolution seem like they are working and then they are unable to create > .pst files with the solutions. Has anyone had similar problems?**** > > Cheers,**** > > Doug **** > > ---**** > > Forum archives can be accessed here: > http://lyris.geosoft.com/read/?fourm=geonet**** > > You are currently subscribed to geonet as: [email protected].**** > > To subscribe or unsubscribe from any of our forums, select the User Forum > selection on the Geosoft Community page: > http://www.geosoft.com/support/community**** > > ---**** > > Forum archives can be accessed here: > http://lyris.geosoft.com/read/?fourm=geonet**** > > You are currently subscribed to geonet as: [email protected].**** > > To subscribe or unsubscribe from any of our forums, select the User Forum > selection on the Geosoft Community page: > http://www.geosoft.com/support/community**** > > **** > > ---**** > > Forum archives can be accessed here: > http://lyris.geosoft.com/read/?fourm=geonet**** > > You are currently subscribed to geonet as: [email protected].**** > > To subscribe or unsubscribe from any of our forums, select the User Forum > selection on the Geosoft Community page: > http://www.geosoft.com/support/community**** > > ---**** > > Forum archives can be accessed here: > http://lyris.geosoft.com/read/?fourm=geonet**** > > You are currently subscribed to geonet as: [email protected].**** > > To subscribe or unsubscribe from any of our forums, select the User Forum > selection on the Geosoft Community page: > http://www.geosoft.com/support/community**** > > > > **** > > ** ** > > -- > Jeffrey D. Phillips Research Geophysicist**** > > Crustal Geophysics and Geochemistry Science Center**** > > U.S. Geological Survey phone: 303-236-1206**** > > Denver Federal Center fax: 303-236-1425**** > > Box 25046, MS 964**** > > Denver, CO 80225 USA email: [email protected]**** > > ---**** > > Forum archives can be accessed here: > http://lyris.geosoft.com/read/?fourm=geonet**** > > You are currently subscribed to geonet as: [email protected].**** > > To subscribe or unsubscribe from any of our forums, select the User Forum > selection on the Geosoft Community page: > http://www.geosoft.com/support/community**** > > --- > > Forum archives can be accessed here: > http://lyris.geosoft.com/read/?fourm=geonet > > You are currently subscribed to geonet as: [email protected]. > > To subscribe or unsubscribe from any of our forums, select the User Forum > selection on the Geosoft Community page: > http://www.geosoft.com/support/community > --- Forum archives can be accessed here: http://lyris.geosoft.com/read/?fourm=geonet You are currently subscribed to geonet as: [email protected]. To subscribe or unsubscribe from any of our forums, select the User Forum selection on the Geosoft Community page: http://www.geosoft.com/support/community
