Ciao Luca, please, stay on the ML. I am not talking about generic samples of NetCDF files I am talking about files at your disposal which are problematic, I mean like one of the files you are testing.
Regards, Simone Giannecchini == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Simone Giannecchini @simogeo Founder/Director GeoSolutions S.A.S. Via Poggio alle Viti 1187 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 333 8128928 http://www.geo-solutions.it http://twitter.com/geosolutions_it ------------------------------------------------------- AVVERTENZE AI SENSI DEL D.Lgs. 196/2003 Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. On Thu, Nov 5, 2015 at 3:47 PM, Lucas Henning <[email protected]> wrote: > Sure, here are some examples. > > https://www.unidata.ucar.edu/software/netcdf/examples/files.html > > ------------------------------ > From: [email protected] > Date: Thu, 5 Nov 2015 14:52:28 +0100 > Subject: Re: [Geoserver-users] NETCDF EXTENSION ON GEOSERVER 2.8/2.9 > To: [email protected] > CC: [email protected]; [email protected] > > > Ciao Lucas, > can you share a sample netcdf? > > > Regards, > Simone Giannecchini > == > GeoServer Professional Services from the experts! > Visit http://goo.gl/it488V for more information. > == > Ing. Simone Giannecchini > @simogeo > Founder/Director > > GeoSolutions S.A.S. > Via Poggio alle Viti 1187 > 55054 Massarosa (LU) > Italy > phone: +39 0584 962313 > fax: +39 0584 1660272 > mob: +39 333 8128928 > > http://www.geo-solutions.it > http://twitter.com/geosolutions_it > > ------------------------------------------------------- > AVVERTENZE AI SENSI DEL D.Lgs. 196/2003 > Le informazioni contenute in questo messaggio di posta elettronica e/o > nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il > loro utilizzo è consentito esclusivamente al destinatario del messaggio, > per le finalità indicate nel messaggio stesso. Qualora riceviate questo > messaggio senza esserne il destinatario, Vi preghiamo cortesemente di > darcene notizia via e-mail e di procedere alla distruzione del messaggio > stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, > divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od > utilizzarlo per finalità diverse, costituisce comportamento contrario ai > principi dettati dal D.Lgs. 196/2003. > > The information in this message and/or attachments, is intended solely for > the attention and use of the named addressee(s) and may be confidential or > proprietary in nature or covered by the provisions of privacy act > (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection > Code).Any use not in accord with its purpose, any disclosure, reproduction, > copying, distribution, or either dissemination, either whole or partial, is > strictly forbidden except previous formal approval of the named > addressee(s). If you are not the intended recipient, please contact > immediately the sender by telephone, fax or e-mail and delete the > information in this message that has been received in error. The sender > does not give any warranty or accept liability as the content, accuracy or > completeness of sent messages and accepts no responsibility for changes > made after they were sent or for other risks which arise as a result of > e-mail transmission, viruses, etc. > > On Thu, Nov 5, 2015 at 2:07 PM, Lucas Henning <[email protected]> wrote: > > Thanks for the answer. Search for "netcdf" with ctrl+f , to see where the > problem happens. > > I try read others .nc files, but is always the same error. > > Here is the logfile. > > someone is using the netcdf extension without problems ? > > > > > Subject: Re: [Geoserver-users] GEOSERVER 2.8/2.9 > > To: [email protected]; [email protected] > From: [email protected] > Date: Wed, 4 Nov 2015 20:41:56 -0200 > > > Hi Lucas, > > These types of errors can have many causes. The UI error message is > generic. I suggest posting the geoserver log output here so people can take > a look to try finding possible causes for the error. > The log is usually placed at file geoserver.log under /logs directory. > As suggestion: Stop geoserver, clear the log (empty its content), start > geoserver, reproduce the error then paste here the log content. > > Rodrigo > > Em 04/11/2015 13:54, Lucas Henning escreveu: > > Hi guys, how are you? > > I have some issue with the netCDF extension on Geoserver 2.9 and 2.8 , no > matter which file .nc I choose, everytime occurs the same error , this > message is always : > " Could not list layers for this store, an error occurred retrieving them: > Failed to create reader from file:///home/henning/Downloads/wrf.nc and > hints null" > > I've created the file "netcdf.projections.properties" and I put on the > "data_dir" directory. Just don't know why this error happens, I've tried > use the extensions netCDF on Geoserver 2.9, and 2.8, and it happens the > same error. > > Someone can send me the "netcdf.projections.properties" to compare with > my?Thank You > > > ------------------------------------------------------------------------------ > > > > _______________________________________________ > Geoserver-users mailing > [email protected]https://lists.sourceforge.net/lists/listinfo/geoserver-users > > > > > ------------------------------ > [image: Avast logo] <https://www.avast.com/antivirus> > > Este email foi escaneado pelo Avast antivírus. > www.avast.com <https://www.avast.com/antivirus> > > > > ------------------------------------------------------------------------------ > > _______________________________________________ > Geoserver-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/geoserver-users > > >
------------------------------------------------------------------------------
_______________________________________________ Geoserver-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/geoserver-users
