----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Permatex now makes a product called Hylomar. It was used in England and was the only place to get it for a time. I guess Permatex made a deal with them to mfg. it here. It does not get hard and is a very good product. I have never used the Permatex formula, but intend to when this tube runs out. Bob Parker Mena, AR. ----- Original Message ----- From: "Tim LeBaron" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Monday, March 18, 2002 7:13 PM Subject: RE: Re: [COUPERS] Front seal leak advice requested > ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- > > A couple of things come to mind with the oil leak. I hate using pematex on the front seal because someday it is going to have to come out and it is a pain to get the old pematex out. In your case though if you havn't tried it I would. Second, have you checked your breather line real good. You could have a pin hole that is letting oil out. On the bad side of things it could be a broken ring that is pressurizing your cankcase. > > > > ==^================================================================ This email was sent to: [EMAIL PROTECTED] EASY UNSUBSCRIBE click here: http://topica.com/u/?aVxiLm.aVzvvT Or send an email to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
