----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Paul. If you bend some 1/4 or 5/16" pipe to fit into the corners of your header tank, you can start a syphon going into a bucket and then vaacum the bottom of the tank. When I did this I was amazed how much water and dirt I got out. A short piece of alum. tubing connected to four or five feet of clear vinyl tubing works well. You can see the gas being sucked up the hose and avoid a mouthful. Try it you'll like it. Bend another piece of tubing for the other end of the hose that fits into the wing tanks, and again you may be amazed what you get out. Jon Page. FLAK MAGNET. 415-C ================================================================== TO UNSUBSCRIBE go to: http://ercoupers.com/lists.htm
<<attachment: winmail.dat>>
