re-did what you suggested and it still works. I am typing this from my monitor 1, so the keyboard error did not repeat? You said you could tell me what to type to make this change permanent? I'd like to do that? And then consider ...looking into FVWM or Mate, and/or a new non-NVidia video card, and/or a spare keyboard...
Cautiously, thank you! Julie On Mon, Feb 23, 2026 at 2:20 PM Julie G <[email protected]> wrote: > what the heck do you even mean desktop environment such as FVWM or > Mate... Like as in, instead of ubuntu, linux, cinnamon, mint, or??? I got > the keyboard running again by unplugging and replugging. > > I only just barely have installed linux cinnamon mint so not opposed to > doing something else but i would just love to have something that works. > Also not completely opposed to another video card? > > Julie > > On Mon, Feb 23, 2026 at 2:15 PM Stephen Wiley <[email protected]> wrote: > >> That keyboard thing sounds like a Window manager/Wayland related issue. >> You could try logging out and back in and launching GNU Cash again the >> way I described and see if the problem is reproducible. >> >> As an aside I would encourage you to use a decent desktop environment >> like FVWM or Mate, unfortunately some of the more "user friendly" DEs >> have gotten a little crazy. Those non-compositing too which will >> probably mean fewer issues with your nvidia drivers. You'll also notice >> X-based apps perform/behave much better. >> >> But that's very much just my opinion and might be more trouble than its >> worth to you. >> >> --Stephen >> >> On Mon, Feb 23, 2026 at 02:03:37PM -0800, Julie G wrote: >> > STEPHEN! >> > >> > ...But wait... I rethought and tried again; misunderstood at first. >> OK, >> > SO! I typed what you said and it opened gnucash so I tried running a >> > report THEN and it WORKED. Yesss! Only problem is, now for whatever >> > reason, my monitor 1 can not recognize my keyboard? It recognizes the >> > mouse but >> > >> > On Mon, Feb 23, 2026 at 1:55 PM Julie G <[email protected]> wrote: >> > >> > > Stephen! >> > > >> > > I typed that in terminal and it responded "failed to load module >> > > "sapp-gtk3-module"... >> > > what if I upgraded to linux mint 22.3 zena? >> > > >> > > On Mon, Feb 23, 2026 at 1:51 PM Stephen Wiley <[email protected]> >> wrote: >> > > >> > >> Ok, I read the rest of the thread so hopefully I won't suggest >> anything >> > >> else silly and get surprised. Sorry I don't personally use flatpack >> and >> > >> didn't even think to check if you were using it. >> > >> >> > >> This should launch it and allow you to generate reports without >> crashing: >> > >> >> > >> flatpak run --env=WEBKIT_DISABLE_COMPOSITING_MODE=1 >> org.gnucash.GnuCash >> > >> >> > >> If it does I can show you how to make it permanent so launching it >> > >> normally works. >> > >> >> > >> --Stephen >> > >> >> > >> On Mon, Feb 23, 2026 at 01:32:40PM -0800, Julie G wrote: >> > >> > Stephen, >> > >> > >> > >> > Thank you! But when I typed what you suggested, I get the >> response that >> > >> > "command 'gnucash' not found, but can be installed with: sudo apt >> > >> install >> > >> > gnucash". >> > >> > >> > >> > should I do this? >> > >> > >> > >> > Julie >> > >> > >> > >> > On Mon, Feb 23, 2026 at 1:24 PM Stephen Wiley <[email protected]> >> > >> wrote: >> > >> > >> > >> > > From the github issue elswhere in the thread it looks like an >> issue >> > >> with >> > >> > > Webkit's hardware acceleration/the Nvidia card drivers and >> people have >> > >> > > the same issues on Xorg. >> > >> > > >> > >> > > I do actually see similar issues from people new to Linux pretty >> often >> > >> > > and temporarily switching to an X based desktop environment is >> > >> typically >> > >> > > something you can try pretty easily. That's why I suggested it. >> > >> > > It looks like you should be able to disable hardware >> acceleration and >> > >> that >> > >> > > will solve your problem. >> > >> > > >> > >> > > So just launch GNUCash from your terminal: >> > >> > > >> > >> > > WEBKIT_DISABLE_COMPOSITING_MODE=1 gnucash >> > >> > > >> > >> > > All one line and hit enter. I'm sure someone else has suggested >> this >> > >> by >> > >> > > now. >> > >> > > >> > >> > > --Stephen >> > >> > > >> > >> > > On Mon, Feb 23, 2026 at 12:45:01PM -0800, Julie G wrote: >> > >> > > > Stephen, >> > >> > > > >> > >> > > > eh, ...whut? Do you get that a lot from gnubies? >> > >> > > > I have little clue what you are talking about. >> > >> > > > Doing a search for "Wayland" in my system info, I find it >> twice. >> > >> One in >> > >> > > > "Display", and the second in Monitor -2. >> > >> > > > Knowing nothing about configuring, GTK, recompiling... >> > >> > > > I would need precise instructions on what exactly to do? But, >> > >> > > > should there not be an easier way? I guess if this is the >> issue, >> > >> there >> > >> > > > might not be, but this is definitely not something I know >> anything >> > >> about. >> > >> > > > What are gnubies to do in a case like this? Oh, dear! >> > >> > > > >> > >> > > > Julie >> > >> > > > >> > >> > > > On Sun, Feb 22, 2026 at 3:20 PM Stephen Wiley < >> [email protected]> >> > >> wrote: >> > >> > > > >> > >> > > > > You might try running on Normal Xorg/Xlibre instead of >> Wayland. >> > >> > > > > In my experience Xwayland is only nominally an Xorg >> replacement >> > >> and in >> > >> > > > > practice there are a lot of subtle show stopping bugs and >> > >> performance >> > >> > > > > issues. I've heard the Nvidia drivers (it looks to me like >> you >> > >> have an >> > >> > > > > nvidia card) are additionally often very unreliable there. >> > >> > > > > >> > >> > > > > Alternatively you could try configuring GTK to use Wayland >> > >> instead, I'm >> > >> > > > > not sure if that's something that's easy to do without >> recompiling >> > >> > > > > though. >> > >> > > > > >> > >> > > > > -- Stephen >> > >> > > > > >> > >> > > > > On Sun, Feb 22, 2026 at 02:17:52PM -0800, Julie G wrote: >> > >> > > > > > Heyo, >> > >> > > > > > >> > >> > > > > > Recently, I installed linux mint 22.2 cinnamon. When >> emailing >> > >> with >> > >> > > an >> > >> > > > > > issue, am I really supposed to upload my whole system >> > >> information? I >> > >> > > > > would >> > >> > > > > > like to know if there is some pertinent bit of that which >> is >> > >> enough, >> > >> > > or >> > >> > > > > if >> > >> > > > > > it really is best to copy it all in case it wants to be >> > >> referenced? >> > >> > > > > > Because this is basically my first time asking a question >> to the >> > >> > > whole >> > >> > > > > mail >> > >> > > > > > list, I am including it below. Meantime, my >> question/issue is >> > >> this: >> > >> > > > > when >> > >> > > > > > I run my gnucash company file everything is fine until I >> try to >> > >> run a >> > >> > > > > > report. I go to reports, choose the type I waNT (it >> doesn't >> > >> seem to >> > >> > > > > matter >> > >> > > > > > which one I ask for; I have tried several), and a new tab >> comes >> > >> up >> > >> > > where >> > >> > > > > > the report should appear. At first it is white, but >> before the >> > >> > > "choose >> > >> > > > > > some options" bit has a chance to appear, the tab goes >> black. >> > >> > > Usually, >> > >> > > > > my >> > >> > > > > > cursor works for a second or two before it freezes up. I >> have >> > >> tried >> > >> > > a >> > >> > > > > > couple suggestions for how to unfreeze my NVidia, to no >> avail. >> > >> I >> > >> > > can't >> > >> > > > > get >> > >> > > > > > a terminal to appear through any command suggestion I've >> tried, >> > >> and >> > >> > > have >> > >> > > > > > found no way to exit out except R-E-I-S-U-B. >> > >> > > > > > >> > >> > > > > > I have a laptop with linux some slightly different version, >> > >> 6.2.9, >> > >> > > and it >> > >> > > > > > can run reports just fine. The gnucash installation on the >> > >> desktop >> > >> > > was >> > >> > > > > > slightly different than the one on the laptop, so I >> installed >> > >> the >> > >> > > exact >> > >> > > > > > same one, 5.14. >> > >> > > > > > >> > >> > > > > > Does anyone have any suggestions on how to resolve this >> issue? >> > >> I >> > >> > > have >> > >> > > > > > tried updating NVidia drivers; I have the latest. Should I >> > >> > > re-install >> > >> > > > > > linux with the same exact kind of cinnamon mint? Would >> love >> > >> some >> > >> > > > > ideas... >> > >> > > > > > >> > >> > > > > > Thanks in advance! >> > >> > > > > > >> > >> > > > > > Julie >> > >> > > > > > >> > >> > > > > > System: >> > >> > > > > > Kernel: 6.17.0-14-generic arch: x86_64 bits: 64 >> compiler: gcc >> > >> v: >> > >> > > 13.3.0 >> > >> > > > > > clocksource: tsc >> > >> > > > > > Desktop: Cinnamon v: 6.4.8 tk: GTK v: 3.24.41 wm: Muffin >> v: >> > >> 6.4.1 >> > >> > > vt: 7 >> > >> > > > > > dm: LightDM v: 1.30.0 >> > >> > > > > > Distro: Linux Mint 22.2 Zara base: Ubuntu 24.04 noble >> > >> > > > > > Machine: >> > >> > > > > > Type: Desktop System: Dell product: Inspiron 580 v: N/A >> > >> serial: >> > >> > > > > > <superuser required> Chassis: >> > >> > > > > > type: 3 serial: <superuser required> >> > >> > > > > > Mobo: Dell model: 0C2KJT v: A00 serial: <superuser >> required> >> > >> uuid: >> > >> > > > > > <superuser required> >> > >> > > > > > BIOS: Dell v: A07 date: 11/13/2010 >> > >> > > > > > CPU: >> > >> > > > > > Info: dual core model: Intel Core i3 550 bits: 64 type: >> MT >> > >> MCP smt: >> > >> > > > > > enabled arch: Westmere rev: 5 >> > >> > > > > > cache: L1: 128 KiB L2: 512 KiB L3: 4 MiB >> > >> > > > > > Speed (MHz): avg: 1655 high: 1847 min/max: 1200/3200 >> cores: 1: >> > >> > > 1359 2: >> > >> > > > > > 1832 3: 1582 4: 1847 >> > >> > > > > > bogomips: 25537 >> > >> > > > > > Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx >> > >> > > > > > Graphics: >> > >> > > > > > Device-1: NVIDIA GT218 [GeForce 210] vendor: Micro-Star >> MSI >> > >> driver: >> > >> > > > > > nouveau v: kernel arch: Tesla >> > >> > > > > > pcie: speed: 2.5 GT/s lanes: 16 ports: active: >> DVI-I-1,VGA-1 >> > >> > > empty: >> > >> > > > > > HDMI-A-1 bus-ID: 01:00.0 >> > >> > > > > > chip-ID: 10de:0a65 class-ID: 0300 temp: 39.0 C >> > >> > > > > > Device-2: Logitech Webcam C260 driver: >> snd-usb-audio,uvcvideo >> > >> > > type: USB >> > >> > > > > > rev: 2.0 >> > >> > > > > > speed: 480 Mb/s lanes: 1 bus-ID: 2-1.1.2:5 chip-ID: >> > >> 046d:081a >> > >> > > > > class-ID: >> > >> > > > > > 0102 serial: <filter> >> > >> > > > > > Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: >> 23.2.6 >> > >> > > driver: >> > >> > > > > X: >> > >> > > > > > loaded: modesetting >> > >> > > > > > unloaded: fbdev,vesa dri: nouveau gpu: nouveau >> display-ID: >> > >> :0 >> > >> > > > > screens: 1 >> > >> > > > > > Screen-1: 0 s-res: 2720x1024 s-dpi: 96 s-size: 719x270mm >> > >> > > (28.31x10.63") >> > >> > > > > > s-diag: 768mm (30.24") >> > >> > > > > > Monitor-1: DVI-I-1 pos: primary,bottom-r model: ViewSonic >> > >> VX1935wm >> > >> > > > > > serial: <filter> >> > >> > > > > > res: 1440x900 hz: 60 dpi: 90 size: 408x255mm >> (16.06x10.04") >> > >> diag: >> > >> > > > > 481mm >> > >> > > > > > (18.9") modes: >> > >> > > > > > max: 1440x900 min: 720x400 >> > >> > > > > > Monitor-2: VGA-1 pos: top-left model: Dell 1908FP serial: >> > >> <filter> >> > >> > > res: >> > >> > > > > > 1280x1024 hz: 60 >> > >> > > > > > dpi: 86 size: 376x301mm (14.8x11.85") diag: 482mm (19") >> > >> modes: >> > >> > > max: >> > >> > > > > > 1280x1024 min: 720x400 >> > >> > > > > > API: EGL v: 1.5 hw: drv: nvidia nouveau platforms: >> device: 0 >> > >> drv: >> > >> > > > > nouveau >> > >> > > > > > device: 1 drv: swrast >> > >> > > > > > gbm: drv: nouveau surfaceless: drv: nouveau x11: drv: >> > >> nouveau >> > >> > > > > inactive: >> > >> > > > > > wayland >> > >> > > > > > API: OpenGL v: 4.5 compat-v: 3.3 vendor: mesa v: >> > >> > > > > 25.2.8-0ubuntu0.24.04.1 >> > >> > > > > > glx-v: 1.4 >> > >> > > > > > direct-render: yes renderer: NVA8 device-ID: 10de:0a65 >> > >> > > > > > Audio: >> > >> > > > > > Device-1: Intel 5 Series/3400 Series High Definition >> Audio >> > >> vendor: >> > >> > > > > Dell 5 >> > >> > > > > > driver: snd_hda_intel >> > >> > > > > > v: kernel bus-ID: 00:1b.0 chip-ID: 8086:3b56 class-ID: >> 0403 >> > >> > > > > > Device-2: NVIDIA High Definition Audio vendor: >> Micro-Star MSI >> > >> > > driver: >> > >> > > > > > snd_hda_intel v: kernel >> > >> > > > > > pcie: speed: 2.5 GT/s lanes: 16 bus-ID: 01:00.1 >> chip-ID: >> > >> > > 10de:0be3 >> > >> > > > > > class-ID: 0403 >> > >> > > > > > Device-3: Logitech Webcam C260 driver: >> snd-usb-audio,uvcvideo >> > >> > > type: USB >> > >> > > > > > rev: 2.0 >> > >> > > > > > speed: 480 Mb/s lanes: 1 bus-ID: 2-1.1.2:5 chip-ID: >> > >> 046d:081a >> > >> > > > > class-ID: >> > >> > > > > > 0102 serial: <filter> >> > >> > > > > > API: ALSA v: k6.17.0-14-generic status: kernel-api >> > >> > > > > > Server-1: PipeWire v: 1.0.5 status: active with: 1: >> > >> pipewire-pulse >> > >> > > > > > status: active >> > >> > > > > > 2: wireplumber status: active 3: pipewire-alsa type: >> plugin >> > >> > > > > > Network: >> > >> > > > > > Device-1: Broadcom NetLink BCM57788 Gigabit Ethernet PCIe >> > >> vendor: >> > >> > > Dell >> > >> > > > > > driver: tg3 v: kernel >> > >> > > > > > pcie: speed: 2.5 GT/s lanes: 1 port: N/A bus-ID: >> 03:00.0 >> > >> chip-ID: >> > >> > > > > > 14e4:1691 class-ID: 0200 >> > >> > > > > > IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: >> > >> <filter> >> > >> > > > > > Drives: >> > >> > > > > > Local Storage: total: 1.36 TiB used: 59.08 GiB (4.2%) >> > >> > > > > > ID-1: /dev/sda vendor: Samsung model: SSD 860 EVO 500GB >> size: >> > >> > > 465.76 >> > >> > > > > GiB >> > >> > > > > > speed: 3.0 Gb/s >> > >> > > > > > tech: SSD serial: <filter> fw-rev: 4B6Q scheme: GPT >> > >> > > > > > ID-2: /dev/sdb vendor: Samsung model: SSD 870 EVO 1TB >> size: >> > >> 931.51 >> > >> > > GiB >> > >> > > > > > speed: 3.0 Gb/s >> > >> > > > > > tech: SSD serial: <filter> fw-rev: 2B6Q scheme: GPT >> > >> > > > > > Partition: >> > >> > > > > > ID-1: / size: 456.88 GiB used: 59.07 GiB (12.9%) fs: >> ext4 dev: >> > >> > > > > /dev/sda3 >> > >> > > > > > ID-2: /boot/efi size: 512 MiB used: 6.1 MiB (1.2%) fs: >> vfat >> > >> dev: >> > >> > > > > /dev/sda2 >> > >> > > > > > Swap: >> > >> > > > > > ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) >> > >> priority: -2 >> > >> > > > > file: >> > >> > > > > > /swapfile >> > >> > > > > > USB: >> > >> > > > > > Hub-1: 1-0:1 info: full speed or root hub ports: 4 rev: >> 2.0 >> > >> speed: >> > >> > > 480 >> > >> > > > > > Mb/s lanes: 1 >> > >> > > > > > chip-ID: 1d6b:0002 class-ID: 0900 >> > >> > > > > > Hub-2: 2-0:1 info: full speed or root hub ports: 2 rev: >> 2.0 >> > >> speed: >> > >> > > 480 >> > >> > > > > > Mb/s lanes: 1 >> > >> > > > > > chip-ID: 1d6b:0002 class-ID: 0900 >> > >> > > > > > Hub-3: 2-1:2 info: Intel Integrated Rate Matching Hub >> ports: 6 >> > >> > > rev: 2.0 >> > >> > > > > > speed: 480 Mb/s >> > >> > > > > > lanes: 1 chip-ID: 8087:0020 class-ID: 0900 >> > >> > > > > > Hub-4: 2-1.1:3 info: Microchip (formerly SMSC) Hub >> ports: 4 >> > >> rev: >> > >> > > 2.0 >> > >> > > > > > speed: 480 Mb/s lanes: 1 >> > >> > > > > > power: 2mA chip-ID: 0424:2504 class-ID: 0900 >> > >> > > > > > Device-1: 2-1.1.2:5 info: Logitech Webcam C260 type: >> > >> video,audio >> > >> > > > > driver: >> > >> > > > > > snd-usb-audio,uvcvideo >> > >> > > > > > interfaces: 4 rev: 2.0 speed: 480 Mb/s lanes: 1 power: >> 500mA >> > >> > > chip-ID: >> > >> > > > > > 046d:081a class-ID: 0102 >> > >> > > > > > serial: <filter> >> > >> > > > > > Hub-5: 2-1.3:4 info: Terminus Hub ports: 4 rev: 2.0 >> speed: >> > >> 480 Mb/s >> > >> > > > > > lanes: 1 power: 100mA >> > >> > > > > > chip-ID: 1a40:0101 class-ID: 0900 >> > >> > > > > > Device-1: 2-1.3.1:6 info: Primax HP Optical Mouse type: >> mouse >> > >> > > driver: >> > >> > > > > > hid-generic,usbhid >> > >> > > > > > interfaces: 1 rev: 2.0 speed: 1.5 Mb/s lanes: 1 power: >> 98mA >> > >> > > chip-ID: >> > >> > > > > > 0461:4d0f class-ID: 0301 >> > >> > > > > > Device-2: 2-1.3.2:7 info: Silicon Motion - Taiwan >> (formerly >> > >> Feiya ) >> > >> > > > > Flash >> > >> > > > > > Drive >> > >> > > > > > type: mass storage driver: usb-storage interfaces: 1 >> rev: >> > >> 2.0 >> > >> > > speed: >> > >> > > > > > 480 Mb/s lanes: 1 >> > >> > > > > > power: 100mA chip-ID: 090c:1000 class-ID: 0806 serial: >> > >> <filter> >> > >> > > > > > Device-3: 2-1.3.3:8 info: Dell QuietKey Keyboard type: >> > >> keyboard >> > >> > > driver: >> > >> > > > > > hid-generic,usbhid >> > >> > > > > > interfaces: 1 rev: 1.1 speed: 1.5 Mb/s lanes: 1 power: >> 70mA >> > >> > > chip-ID: >> > >> > > > > > 413c:2106 class-ID: 0301 >> > >> > > > > > Hub-6: 3-0:1 info: full speed or root hub ports: 2 rev: >> 2.0 >> > >> speed: >> > >> > > 480 >> > >> > > > > > Mb/s lanes: 1 >> > >> > > > > > chip-ID: 1d6b:0002 class-ID: 0900 >> > >> > > > > > Hub-7: 3-1:2 info: Intel Integrated Rate Matching Hub >> ports: 8 >> > >> > > rev: 2.0 >> > >> > > > > > speed: 480 Mb/s >> > >> > > > > > lanes: 1 chip-ID: 8087:0020 class-ID: 0900 >> > >> > > > > > Device-1: 3-1.2:3 info: Fitipower Integrated Mass Storage >> > >> Device >> > >> > > type: >> > >> > > > > > mass storage >> > >> > > > > > driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 >> Mb/s >> > >> > > lanes: 1 >> > >> > > > > > power: 250mA >> > >> > > > > > chip-ID: 18e3:9106 class-ID: 0806 serial: <filter> >> > >> > > > > > Device-2: 3-1.4:4 info: Canon CanoScan LiDE 210 type: >> <vendor >> > >> > > specific> >> > >> > > > > > driver: N/A >> > >> > > > > > interfaces: 1 rev: 2.0 speed: 480 Mb/s lanes: 1 power: >> 500mA >> > >> > > chip-ID: >> > >> > > > > > 04a9:190a class-ID: ff00 >> > >> > > > > > Hub-8: 4-0:1 info: full speed or root hub ports: 2 rev: >> 1.1 >> > >> speed: >> > >> > > 12 >> > >> > > > > > Mb/s lanes: 1 >> > >> > > > > > chip-ID: 1d6b:0001 class-ID: 0900 >> > >> > > > > > Hub-9: 5-0:1 info: full speed or root hub ports: 2 rev: >> 1.1 >> > >> speed: >> > >> > > 12 >> > >> > > > > > Mb/s lanes: 1 >> > >> > > > > > chip-ID: 1d6b:0001 class-ID: 0900 >> > >> > > > > > Sensors: >> > >> > > > > > System Temperatures: cpu: 55.0 C mobo: N/A gpu: nouveau >> temp: >> > >> 40.0 >> > >> > > C >> > >> > > > > > Fan Speeds (rpm): cpu: 935 fan-2: 812 >> > >> > > > > > Repos: >> > >> > > > > > Packages: 2560 pm: dpkg pkgs: 2545 pm: flatpak pkgs: 15 >> > >> > > > > > No active apt repos in: /etc/apt/sources.list >> > >> > > > > > Active apt repos in: >> /etc/apt/sources.list.d/element-io.list >> > >> > > > > > 1: deb >> > >> > > [signed-by=/usr/share/keyrings/element-io-archive-keyring.gpg] >> > >> > > > > > https: //packages.element.io/debian/ default main >> > >> > > > > > Active apt repos in: >> > >> /etc/apt/sources.list.d/google-chrome.list >> > >> > > > > > 1: deb [arch=amd64] https: // >> > >> dl.google.com/linux/chrome/deb/ >> > >> > > stable >> > >> > > > > main >> > >> > > > > > Active apt repos in: >> > >> > > > > > /etc/apt/sources.list.d/official-package-repositories.list >> > >> > > > > > 1: deb http: //packages.linuxmint.com zara main >> upstream >> > >> import >> > >> > > > > backport >> > >> > > > > > 2: deb http: //archive.ubuntu.com/ubuntu noble main >> > >> restricted >> > >> > > > > universe >> > >> > > > > > multiverse >> > >> > > > > > 3: deb http: //archive.ubuntu.com/ubuntu >> noble-updates main >> > >> > > > > restricted >> > >> > > > > > universe multiverse >> > >> > > > > > 4: deb http: //archive.ubuntu.com/ubuntu >> noble-backports >> > >> main >> > >> > > > > > restricted universe multiverse >> > >> > > > > > 5: deb http: //security.ubuntu.com/ubuntu/ >> noble-security >> > >> main >> > >> > > > > > restricted universe multiverse >> > >> > > > > > Info: >> > >> > > > > > Memory: total: 12 GiB note: est. available: 9.58 GiB >> used: >> > >> 4.58 GiB >> > >> > > > > > (47.9%) >> > >> > > > > > Processes: 306 Power: uptime: 6m states: freeze,mem,disk >> > >> suspend: >> > >> > > deep >> > >> > > > > > wakeups: 0 >> > >> > > > > > hibernate: platform Init: systemd v: 255 target: >> graphical >> > >> (5) >> > >> > > > > default: >> > >> > > > > > graphical >> > >> > > > > > Compilers: gcc: 13.3.0 Client: Cinnamon v: 6.4.8 inxi: >> 3.3.34 >> > >> > > > > > _______________________________________________ >> > >> > > > > > gnucash-user mailing list >> > >> > > > > > [email protected] >> > >> > > > > > To update your subscription preferences or to unsubscribe: >> > >> > > > > > https://lists.gnucash.org/mailman/listinfo/gnucash-user >> > >> > > > > > ----- >> > >> > > > > > Please remember to CC this list on all your replies. >> > >> > > > > > You can do this by using Reply-To-List or Reply-All. >> > >> > > > > >> > >> > > > > >> > >> > > >> > >> > > >> > >> >> > >> >> >> _______________________________________________ gnucash-user mailing list [email protected] To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user ----- Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
