I would recommend: 1) make sure USB drives disconnected during install
2) make sure SATA disks set to PATA mode in BIOS Also, try to unplug all other PCI hardware if any... You could find more information here on what hardware is supported: http://www.nexenta.com/corp/index.php?option=com_content&task=view&id=66&Itemid=86 ps: NexentaStor built on top of NexentaCore... so, same HW list. But this is true for any OpenSolaris too within the same ON build.. On Sat, 2008-03-22 at 19:23 -0700, Omen Wild wrote: > I am trying to install Nexenta on a system to test. I have been running > Debian for 9 years, so once I get it installed I should be all set. > Hardware is a Core 2 Duo, Abit IP35 Pro, Nvidia 8800 GTX, PS/2 mouse > and keyboard through a KVM. > > The problem is that the install hangs during boot, before the Debian > installer runs. When booting with -kd and using moddebug/W 80000000 I > see the modules scroll by until it gets to: > installing uhci, module id 93. > > That is where it hangs. F1-A breaks into the debugger, but I have no > idea what to do there. > > Any ideas? Is there a list of hardware that is known to work? > > Thanks, > Omen _______________________________________________ gnusol-users mailing list [email protected] http://lists.sonic.net/mailman/listinfo/gnusol-users
