Hi, I've checked the GooSync "sync time" issue and it appears to be a bug in the client that doesn't show the correct sync time if you select the GMT +10 time zone. I'll forward this to the client developer so they can investigate.
With regards to the actual sync: do new entries synchronise to the device correctly? Any events that have already synchronised incorrectly may not be corrected by changing the time zone for the GooSync client. You would need to force the events back down to the device so that the GooSync client can save them using the correct time zone. The easiest way to do this is to perform a reload device synchronisation. Please note that this will remove all entries from the device first before re-sending the Google data. Therefore if your device contains more recent information this should not be performed. If you are unable to perform a reload then a slow sync should be sufficient. On Jul 17, 11:05 am, Don <[EMAIL PROTECTED]> wrote: > Hi Stuart, thanks for your suggestion - it seemed a possibility but > was not the cause of my problem. > > I exited as you suggested, then did a soft reset, then set zone to +1 > GMT, confirmed, then set it back to +10, then resynced. > > Same result, unfortunately. > > The client screen shows the sync time as -1 GMT - any clues from that > fact? > > Any other suggestions? Does my log file provide any clues? > > Hope there is some solution... > > Regards, Don > > Don > > On Jul 17, 12:33 am, Stuart - GooSync Support > > <[EMAIL PROTECTED]> wrote: > > Hi, > > > We have seen problems with the GooSync client retaining "old" time > > zone information if these details are changed while the client is > > still running in memory (i.e. the client was not shut down using the > > Exit option in the menu). > > > I suggest closing down the client (select Exit from the client menu) > > and then change your time zone again (you may need to change it to > > something other than your native time zone and then select the correct > > one again to ensure the settings are recognised correctly). > > > Once done start the GooSync client again and sync once more. > > > On Jul 13, 6:04 am, Don <[EMAIL PROTECTED]> wrote: > > > > Have a HP 6828 WM5 which was working fine with GooSync until I had to > > > do a "hard reset" necessitating resinstallation of the Goosync > > > client. My syncs are now out by 10hrs - the timezone difference for > > > Oz. > > > > - I have installed the MS daylight saving patch > > > - deleted and reselected the HP 6828 from my account > > > - double checked my timezone on my PC, on 6828, in Google, and in > > > Goosync > > > > Syncs are 10hrs out and interestingly, the sync time shown in the > > > Goosync client screen is also out by 11Hrs. > > > > Any ideas please? > > > > Login is DonSweeney > > > > Don --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "GooSync" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/goosync?hl=en -~----------~----~----~----~------~----~------~--~---
