Hi Marcus,

The firmware version is 2.4. I updated libgphoto2 to 2.5.20. USB mode is PTP.
There is still an error message PTP Store Not Available after running gphoto2 
—list-files, however all the files can be listed.

It seems gphoto2 works good even with the above error message displayed. My 
question is that is it possible for us to get more configuration items out of 
the followings with gphoto2 —list-config, because I need to setup some more 
parameters like shutter speed, iso and so on over gphoto2.

pi@piserver:~$ gphoto2 --list-config                                         
/main/actions/opcode                                                           
/main/status/serialnumber
/main/status/manufacturer
/main/status/cameramodel
/main/status/deviceversion
/main/status/vendorextension
/main/status/batterylevel
/main/other/d406
/main/other/d407
/main/other/5001



Thank you,
Michael Xiuchuan Zhang
zhangxiuch...@vip.sina.com





> On Dec 29, 2018, at 6:22 AM, Marcus Meissner <mar...@jet.franken.de> wrote:
> 
> 
> On Sat, Dec 29, 2018 at 03:18:31PM +0100, Marcus Meissner wrote:
>> On Fri, Dec 28, 2018 at 06:43:21PM -0800, zhangxiuchuan wrote:
>>> Hi Marcus,
>>> 
>>> I was testing Panasonic DC-GH5, USB mode: PictBridge (PTP), and got an 
>>> error message with command gphoto2 —list-files, please see the attached 
>>> file.
>>> 
>>> Also I am wondering if more parameters can be got with gphoto2 
>>> —list-config. So far only 10 items are listed:
>>> 
>>> pi@piserver:~$ gphoto2 --list-config                                        
>>>  
>>> /main/actions/opcode                                                        
>>>    
>>> /main/status/serialnumber
>>> /main/status/manufacturer
>>> /main/status/cameramodel
>>> /main/status/deviceversion
>>> /main/status/vendorextension
>>> /main/status/batterylevel
>>> /main/other/d406
>>> /main/other/d407
>>> /main/other/5001
>> 
>> You need the firmware version 2.3 or later.
>> 
>> I do not fully remember if I had to switch the camera to a different USB 
>> mode too,
>> but PictBridge is not the right one.
> 
> Also, libgphoto2 should be 2.5.19 or newer, as this is the version with first 
> capture support
> for the GH5.
> 
> Ciao, Marcus

_______________________________________________
Gphoto-devel mailing list
Gphoto-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gphoto-devel

Reply via email to