Thank you Marcus for this information. I returned the GH5 which I rented and may test the Techer mode when available. This camera has a rolling shutter when taking 6k photos, this is not good for my project.
Thank you, Michael Xiuchuan Zhang zhangxiuch...@vip.sina.com > On Jan 4, 2019, at 4:13 AM, Marcus Meissner <mar...@jet.franken.de> wrote: > > > Hi, > > Can you check if the GH5 has this menu and is in the Tether mode, like > shown on this page? > > https://www.premiumbeat.com/blog/shoot-tethered-using-gh5/ > > Ciao, Marcus > On Sat, Dec 29, 2018 at 05:01:51PM -0800, zhangxiuchuan wrote: >> Hi Marcus, >> >> The firmware version is 2.4. I updated libgphoto2 to 2.5.20. USB mode is PTP. >> There is still an error message PTP Store Not Available after running >> gphoto2 —list-files, however all the files can be listed. >> >> It seems gphoto2 works good even with the above error message displayed. My >> question is that is it possible for us to get more configuration items out >> of the followings with gphoto2 —list-config, because I need to setup some >> more parameters like shutter speed, iso and so on over gphoto2. >> >> pi@piserver:~$ gphoto2 --list-config >> /main/actions/opcode >> >> /main/status/serialnumber >> /main/status/manufacturer >> /main/status/cameramodel >> /main/status/deviceversion >> /main/status/vendorextension >> /main/status/batterylevel >> /main/other/d406 >> /main/other/d407 >> /main/other/5001 >> >> >> >> Thank you, >> Michael Xiuchuan Zhang >> zhangxiuch...@vip.sina.com >> >> >> >> >> >>> On Dec 29, 2018, at 6:22 AM, Marcus Meissner <mar...@jet.franken.de> wrote: >>> >>> >>> On Sat, Dec 29, 2018 at 03:18:31PM +0100, Marcus Meissner wrote: >>>> On Fri, Dec 28, 2018 at 06:43:21PM -0800, zhangxiuchuan wrote: >>>>> Hi Marcus, >>>>> >>>>> I was testing Panasonic DC-GH5, USB mode: PictBridge (PTP), and got an >>>>> error message with command gphoto2 —list-files, please see the attached >>>>> file. >>>>> >>>>> Also I am wondering if more parameters can be got with gphoto2 >>>>> —list-config. So far only 10 items are listed: >>>>> >>>>> pi@piserver:~$ gphoto2 --list-config >>>>> >>>>> /main/actions/opcode >>>>> >>>>> /main/status/serialnumber >>>>> /main/status/manufacturer >>>>> /main/status/cameramodel >>>>> /main/status/deviceversion >>>>> /main/status/vendorextension >>>>> /main/status/batterylevel >>>>> /main/other/d406 >>>>> /main/other/d407 >>>>> /main/other/5001 >>>> >>>> You need the firmware version 2.3 or later. >>>> >>>> I do not fully remember if I had to switch the camera to a different USB >>>> mode too, >>>> but PictBridge is not the right one. >>> >>> Also, libgphoto2 should be 2.5.19 or newer, as this is the version with >>> first capture support >>> for the GH5. >>> >>> Ciao, Marcus >> > >
_______________________________________________ Gphoto-devel mailing list Gphoto-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gphoto-devel
