Hi, Can you check if the GH5 has this menu and is in the Tether mode, like shown on this page?
https://www.premiumbeat.com/blog/shoot-tethered-using-gh5/ Ciao, Marcus On Sat, Dec 29, 2018 at 05:01:51PM -0800, zhangxiuchuan wrote: > Hi Marcus, > > The firmware version is 2.4. I updated libgphoto2 to 2.5.20. USB mode is PTP. > There is still an error message PTP Store Not Available after running gphoto2 > —list-files, however all the files can be listed. > > It seems gphoto2 works good even with the above error message displayed. My > question is that is it possible for us to get more configuration items out of > the followings with gphoto2 —list-config, because I need to setup some more > parameters like shutter speed, iso and so on over gphoto2. > > pi@piserver:~$ gphoto2 --list-config > /main/actions/opcode > > /main/status/serialnumber > /main/status/manufacturer > /main/status/cameramodel > /main/status/deviceversion > /main/status/vendorextension > /main/status/batterylevel > /main/other/d406 > /main/other/d407 > /main/other/5001 > > > > Thank you, > Michael Xiuchuan Zhang > zhangxiuch...@vip.sina.com > > > > > > > On Dec 29, 2018, at 6:22 AM, Marcus Meissner <mar...@jet.franken.de> wrote: > > > > > > On Sat, Dec 29, 2018 at 03:18:31PM +0100, Marcus Meissner wrote: > >> On Fri, Dec 28, 2018 at 06:43:21PM -0800, zhangxiuchuan wrote: > >>> Hi Marcus, > >>> > >>> I was testing Panasonic DC-GH5, USB mode: PictBridge (PTP), and got an > >>> error message with command gphoto2 —list-files, please see the attached > >>> file. > >>> > >>> Also I am wondering if more parameters can be got with gphoto2 > >>> —list-config. So far only 10 items are listed: > >>> > >>> pi@piserver:~$ gphoto2 --list-config > >>> > >>> /main/actions/opcode > >>> > >>> /main/status/serialnumber > >>> /main/status/manufacturer > >>> /main/status/cameramodel > >>> /main/status/deviceversion > >>> /main/status/vendorextension > >>> /main/status/batterylevel > >>> /main/other/d406 > >>> /main/other/d407 > >>> /main/other/5001 > >> > >> You need the firmware version 2.3 or later. > >> > >> I do not fully remember if I had to switch the camera to a different USB > >> mode too, > >> but PictBridge is not the right one. > > > > Also, libgphoto2 should be 2.5.19 or newer, as this is the version with > > first capture support > > for the GH5. > > > > Ciao, Marcus > _______________________________________________ Gphoto-devel mailing list Gphoto-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gphoto-devel
