In a message dated 9/25/01 9:57:19 PM Pacific Daylight Time,
[EMAIL PROTECTED] writes:
> the throttlebodies are 46mm so they should handle it he said. Then
> possibly put the FZR or YZF cam in the GTS for for topend grunt
Carl;
I believe the throttle bodies are 34mm on the gts. Just one reason I
went with what I did. If you get hold of a stock FZR airbox it will fit
behind the radiator. I was using a slightly modified air box at first with
the full D&D system then went to a exup exhaust with the individual K&N
filters. If you use the airbox you will have to duct in air since the stock
box takes air in from the rear. I think you will find that if you solve the
worn needle jets it will cure you rich condition.
Bob
