It's a whole range of uncharted territory ! Does anyone have anymore information on the YZF750 that was raced using GTS fuel injection ? I've seen pictures of it on the net somewhere !
Pete Piazza is using a 1040 or thereabouts and retained the fuel injection, can't remember if Pete did any dyno runs though. Pete ? Barry Edwards ----- Original Message ----- From: "Rev. Baroon" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, October 13, 2001 9:25 PM Subject: [moved from YamahaFJ list] Re: Flatslide carbs...(non FJ) > Certainly. Mine has the FZR1000 engine with the 1040 kit, it would be fun > to see what would happen with the 1040 on the GTS but I wonder what the > stock throttlebodies would think about that. They're only, what..? 34mm vs > the FZRs 38 or so.. would that 4mm less choke it to death? Frankly, I don't > need top-end gargantuan HP, I think wheelies in 3rd from a standstill would > be more fun. :) > > Another way might be to start with the stock GTS and use EXUP headers, 1040 > kit and maybe open the throttlebodies 1mm more. > > Does anyone know the flowlimits of the injectors? > > > > ----- Original Message ----- > From: "Barry Edwards" <[EMAIL PROTECTED]> > > > > Woh, don't get me wrong, I still see a very desirable GTS there! I think > to > > a very large extent you can still have your cake and eat it. > > > > On my own bike I would retain the Exup. I might try leaving the fuel > > injection, I've heard it may have the scope to adjust itself to the > modified > > flows within the ECU. (I have seen pictures of GTS1000 injection on a > racing > > YZF750). > > > > Unless the previous owner has changed camshafts I doubt whether they will > > have done anything that would messed the bottom-end totally. Somewhere in > > your intake and exhaust set-up I reckon lies your problem. Crack that and > > you will have best of both worlds. > > > > Good luck, hope you keep us updated on the GTS board too! > > > > > > Barry Edwards > > > > > > > > > > ----- Original Message ----- > > > > > Yeah, there is a good reason there are hundreds of thousands of $$ spend > > > in the engineering department at various MC manufacturers! > > > > > > They try to make a very good bike that fits a wide array of people, and > > > although I can proudly show a sheet with a curve up to 137HP, it doesn't > > > mean shit for my lowend and everyday driveability. > > > > > > Bot gosh it's fun to hop on it and leave the front wheel in the air a > few > > > inches for a while.. heheheeh > > > > > > On Sat, 13 Oct 2001 18:23:03 +0100 "Barry Edwards" > > > <[EMAIL PROTECTED]> writes: > > > > > > > I bought my GTS with the intention of slipping a Thunderace engine > > > > into it. But soon realised that for what the GTS is intended, it's > > > detuned > > > > engine, giving a broader spread of torque, is really perfect. It's > more > >
