why don't you send the set files to support, with a detailed explanation of how things work under 6.1, and a detailed explanation of what it takes to see they're broken under 7.1?
------------------------------ Chip Orange Database Administrator Florida Public Service Commission [email protected] (850) 413-6314 (Any opinions expressed are solely those of the author and do not necessarily reflect those of the Florida Public Service Commission.) > -----Original Message----- > From: Chris Belle [mailto:[email protected]] > Sent: Monday, July 13, 2009 1:10 AM > To: [email protected] > Subject: Re: FW: 7.1 stability problems > > I've gotten the same here on several ocasions. > > After abandoning we 7.0 in frustration because of a failure to > communicate to gwmicro my issues for various reasons I won't go in to > here, I decided to give we7.1 a test drive. > > To their credit, one issue that's seems to have been resolved is the > drag and drop issue, it now seems to be working. > > This was broken in the we7 release. > > My test drive of it with levelator with we7.1 seems to work now. > > One very serious problem I am having with we since the whole we7 > cycle began is the issue of setfiles being broken between > we6.1 and we7. > > I have some very extensive and very well written soundforge setfiles > written by my good friend Tom Kingston whom I beta tested for > last year. > > These setfiles add a lot of functionallity and usability to > soundforge 8, and I modifyed them to work with my prefered soundforge > 7 installation. > > When I upgraded to we7 in any of it's incarnations, these setfiles > neither load correctly, and window cordinates are messed up, and all > kinds of strange things happen. > > I've had some very brief conversation with gwmicro over this but have > never gotten this satisfactorily addressed. > > There is no change with we7.1, the setfiles are still very broken. > > The basic structure of the setfiles is this, there are two loader > sets which are associated with different modules in soundforge, and > hyperactive windows will trigger and load the appropriate setfile as > needed for any given window, so when you want to create a new setfile > for a new part of the forge, you just make a new setfile and load it > with a hyperactive window from one of the loader sets. > > Pretty slick, kind of what I used to do with the ram locations with > vocal-eyes and branching remember when we only had 10 hyperactive > windows, my have we come a long way. > > something changed in we7 which broke these setfiles. > > Any enlightening information would be appreciated. > > Regards. > > > > At 04:36 PM 7/12/2009, you wrote: > >I am having the same problem. If you move around to quick in windows > >explorer or internet explorer w e will crash. > > > >Edward > > > > > >-----Original Message----- > >From: Chip Orange [mailto:[email protected]] > >Sent: Sunday, July 12, 2009 3:29 PM > >To: [email protected] > >Subject: RE: 7.1 stability problems > > > >Yes, Bill, I was; then I switched to dec-talk access 32, > from Eloquence, and > >things do seem much better. why not try that and see if it > makes a big > >difference; it will help them a lot, in tracking it down, if > you find this > >out. > > > >Chip > > > > > >-----Original Message----- > >From: Bill Holton [mailto:[email protected]] > >Sent: Sunday, July 12, 2009 2:32 PM > >To: [email protected] > >Subject: 7.1 stability problems > > > >Hi. > > > >Is anyone else having trouble with 7.1 when you start moving > fast around the > >computer? I have WE 7.1 stop talking on both my XP and > Vista machines, both > >using eloquence, if I start keying around too fast with > either Windows keys > >or WE hotkeys. The rest of the sounds on the PC work fine, > and it's not > >locking up, but it takes speech about ten seconds to start > again. Other > >times it doesn't start again, and the only way to get WE > back is to do a > >hard reset. > > > >On my Vista machine, I also have a problem I have had ever > since I started > >using Vista, only now it happens more frequently. Speech > will die, the > >other sounds are working fine, and the only way to get WE > back is to turn > >the machine off or do a start menu restart. Then, just > before Windows shuts > >down, the speech comes back fine, for about two seconds, > then the machine is > >restarted. This is very frustrating. Anyone else having > this situation? > > > >Thanks. Bill > > > >Bill > > > > > > > >If you reply to this message it will be delivered to the > original sender > >only. If your reply would benefit others on the list and > your message is > >related to GW Micro, then please consider sending your message to > >[email protected] so the entire list will receive it. > > > >All GW-Info messages are archived at > http://www.gwmicro.com/gwinfo, and can > >be searched through and sorted using the search form at the > bottom of the > >page. > > > >If you wish to unsubscribe from this list, send a message to > >[email protected] and include leave gw-info in the body > of the message. > > > >If you reply to this message it will be delivered to the > original sender > >only. If your reply would benefit others on the list and > your message is > >related to GW Micro, then please consider sending your message to > >[email protected] so the entire list will receive it. > > > >All GW-Info messages are archived at > http://www.gwmicro.com/gwinfo, and can > >be searched through and sorted using the search form at the > bottom of the > >page. > > > >If you wish to unsubscribe from this list, send a message to > >[email protected] and include leave gw-info in the body > of the message. > > > >If you reply to this message it will be delivered to the original > >sender only. If your reply would benefit others on the list and > >your message is related to GW Micro, then please consider sending > >your message to [email protected] so the entire list will > receive it. > > > >All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, > >and can be searched through and sorted using the search > >form at the bottom of the page. > > > >If you wish to unsubscribe from this list, send a message to > >[email protected] and include leave gw-info in the body > >of the message. > > If you reply to this message it will be delivered to the original > sender only. If your reply would benefit others on the list and > your message is related to GW Micro, then please consider sending > your message to [email protected] so the entire list will > receive it. > > All GW-Info messages are archived at > http://www.gwmicro.com/gwinfo, and can be searched through > and sorted using the search > form at the bottom of the page. > > If you wish to unsubscribe from this list, send a message to > [email protected] and include leave gw-info in the body > of the message. > > If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be searched through and sorted using the search form at the bottom of the page. If you wish to unsubscribe from this list, send a message to [email protected] and include leave gw-info in the body of the message.
