Hi: A couple issues I'm wondering about. I have a file I'm trying to load on to the bsp. It was originally a pdf document, I used the save as text feature to convert it to txt and then copied it to my compact flash card. The file is about 575kb in size, I've looked at the file on the pc and on the flash card using the pc and both copies open fine, but when I try to open the file on the bsp I get two reactions. One says loading and the bsp beeps and beeps and beeps, I think it went on at one time for 5 minutes without loading the file, I had to use reset to get it to stop. The second reaction is that it beeps once or twice, loads the file but the file is empty. When I check the flash card I now have two files one being the 575k the other showing 0k. Any ideas why this file won't load properly. The card has all kinds of free space on it, beyond that I can't think of any reason it won't load.
Second issue, I've had this happen a couple times since the upgrade. I often leave files on the word processor and turn the machine off or go to other programs and so on. Occasionally I've gone back to the file to find a portion of it has been converted to what I think might be computer braille. Not the entire file, but enough so that it's a pain to have to go over it and repair the text Whole paragraphs or pages suddenly are no longer in grade 2 braille and I haven't a clue as to why. I use contracted braille but save all my documents as txt files. here's an example of the mess my paragraph has become. 1I SUSPECT T'S 9CORRECT & to YOU'RE Abled+ A VISUAL ASPECT 6! AUDI# "OS B S5T 1H5RY AN EMAIL 63FIRM Tbled I suspect that's incorrect and they're adding a visual aspect to the audible ones but sent Henry an email to confirm. I assume the first is computer braille? Any suggestions as to why only part of a document gets converted and how I can prevent this, anyone else have something similar happen? Thanks for any info. Tessa If you wish to unsubscribe from this list, visit: http://www.gwmicro.com/listserv
