I've seen that problem and raised it on the list before, hopefully it's one thing that will be addressed in the minor update. No, moving around the document does not cause the text to revert back to contracted braille, I wish it was that easy. Tessa ----- Original Message ----- From: "Mike Freeman" <[email protected]> To: <[email protected]> Sent: Thursday, September 02, 2010 11:39 PM Subject: Re: [GWN] two file problems
I'ave had the same experience as Ninette. Mike ----- Original Message ----- From: "Ninette Legates" <[email protected]> To: <[email protected]> Sent: Thursday, September 02, 2010 8:28 PM Subject: Re: [GWN] two file problems > Tessa, regarding your second question: If you move around in the file a > bit--say, go back to the beginning or up and down lines a couple times, > will your text revert to contracted braille? I've been having the > experience that lines switch to uncontracted braille temporarily, but go > back to their original form when I leave that particular line of text and > then come back to it. If that works for you, it will make correcting the > text in question unnecessary.--Ninette > > ----- Original Message ----- > From: "Tessa" <[email protected]> > To: <[email protected]> > Sent: Thursday, September 02, 2010 9:47 PM > Subject: [GWN] two file problems > > >> Hi: >> A couple issues I'm wondering about. >> I have a file I'm trying to load on to the bsp. It was originally a pdf >> document, I used the save as text feature to convert it to txt and then >> copied it to my compact flash card. The file is about 575kb in size, I've >> looked at the file on the pc and on the flash card using the pc and both >> copies open fine, but when I try to open the file on the bsp I get two >> reactions. One says loading and the bsp beeps and beeps and beeps, I >> think >> it went on at one time for 5 minutes without loading the file, I had to >> use >> reset to get it to stop. The second reaction is that it beeps once or >> twice, >> loads the file but the file is empty. When I check the flash card I now >> have >> two files one being the 575k the other showing 0k. Any ideas why this >> file >> won't load properly. The card has all kinds of free space on it, beyond >> that >> I can't think of any reason it won't load. >> >> Second issue, I've had this happen a couple times since the upgrade. I >> often >> leave files on the word processor and turn the machine off or go to other >> programs and so on. Occasionally I've gone back to the file to find a >> portion of it has been converted to what I think might be computer >> braille. >> Not the entire file, but enough so that it's a pain to have to go over it >> and repair the text Whole paragraphs or pages suddenly are no longer in >> grade 2 braille and I haven't a clue as to why. I use contracted braille >> but >> save all my documents as txt files. >> here's an example of the mess my paragraph has become. >> >> 1I SUSPECT T'S 9CORRECT & to YOU'RE Abled+ A VISUAL ASPECT 6! AUDI# "OS B >> S5T 1H5RY AN EMAIL 63FIRM Tbled >> I suspect that's incorrect and they're adding a visual aspect to the >> audible >> ones but sent Henry an email to confirm. >> >> I assume the first is computer braille? Any suggestions as to why only >> part >> of a document gets converted and how I can prevent this, anyone else have >> something similar happen? >> Thanks for any info. >> Tessa >> >> If you wish to unsubscribe from this list, visit: >> >> http://www.gwmicro.com/listserv >> >> > > > If you wish to unsubscribe from this list, visit: > > http://www.gwmicro.com/listserv > If you wish to unsubscribe from this list, visit: http://www.gwmicro.com/listserv If you wish to unsubscribe from this list, visit: http://www.gwmicro.com/listserv
