thanks, will call my customer and ask, possible his custom is still there.
Fp At 08:58 AM 1/9/2008, Rick Glazier Poked the stick with: >Printing (settings) used to be a problem for me too when "moving", but that >went >away years ago when they embedded all that into the main files. >I guess you just have to re-make all the settings, (I just asked on the other >list...) >I was once told "printing" has to go through something like 32 different >layers before >anything happens... What ever brought that up was fixed right away. >(If you want a program to work correctly, be a good <and very active> beta >tester.) >The stories I could tell....... > >Didn't know about the shortcut bar... I was moving away from their embedded >on-line banking (my only "trigger" for a forced upgrade), and had been using my >Banks WEB interface instead for awhile now... Ever since a "QBW" server/program >(on their end) mis-configuration it took them 6 weeks to figure out (at my >bank). >Before it was resolved, I had a "personal" work contact number for the support >guys desk at company headquarters, and his schedule... <grin> > >By some fluke, the add for '08 came in yesterdays mail. >If I'm going to loose more than I'll gain --- no way... > >The company has changed over the years. The "main contact" I had there >is gone now... (Tech support - level 4 or5...) > >Here is what I asked for you. > > ** An acquaintance from another (tech support) list asked me the following: > ** > **> Did a clean install of 08 for a customer and his tractor feed > **> invoices did not maintain formatting when the qbb file was restored. > ** > **He basically wants to know if that "is normal", or should those setting > **have been "OK"... "We" are assuming they will have to be re-done from > **scratch... > ** > **Rick Glazier > >The first answer is back already. (8 minutes.) > >>>Good question. I had one client's invoice setting magically change from a >>>specialized template back to an Intuit one (it hadn't been an Intuit one in >>>5 years) but reset and the template itself was fine. That's all I've seen. > >The above could be "operator error"... Note it only needed to be re-assigned >as the "default"... >If (when) others reply, I'll send them off list... >If you have additional questions, please join... (It will be faster for you... ><grin>) >(I just sent a "slipstreamed" invite.) > > Rick Glazier > >From: "FORC5" > > >>Did a clean install of 08 for a customer and (clipped) -- Tallyho ! ]:8) Taglines below ! -- A penny saved is a Congressional oversight.
