Looks good, I would make it longer since panels are not that smooth and not that uniform in thickness in my experience. Also for thick panels you might want a way to go halfway in depth first to reduce the force needed.
Good luck! Vladimir On Jun 16, 2014 7:47 PM, "Tiprin Lujan" <[email protected]> wrote: > Hi everyone, I'll be building my first hexayurt this year, an H12. I was > hoping to miter the panels to eliminate some of the sunlight gaps that are > caused by Danger hinges. I'd love your opinion on this jig I made up. I > have two different blocks, one cut at 15 deg and one at 30 deg. The idea > is to screw this long razor blade onto the block and use that as a angle > cutting jig. The back of the block is straight and flat so I can clamp a > guide fence to the panel for a straight cut. What do ya think? > > > > <https://lh3.googleusercontent.com/-BkBDWw1DRHI/U5-o7v6JhVI/AAAAAAAAAJM/Aj5Iv3SoGUo/s1600/IMAG0828%5B1%5D.jpg> > > > <https://lh3.googleusercontent.com/-p9Phv8jHY6A/U5-pGatqqfI/AAAAAAAAAJU/dKoJnjlAILY/s1600/IMAG0827%5B1%5D.jpg> > > > <https://lh6.googleusercontent.com/-m0EHPapRFZ4/U5-oxA8eF8I/AAAAAAAAAJE/wS_Fd8uDl4E/s1600/IMAG0829%5B1%5D.jpg> > > -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/hexayurt. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/d/optout.
