Great! Thanks for the advice. I just want to confirm before making cuts. I plan on cutting the angles below. I'm not too sure about the walls, which I plan on cutting at 60deg on each 4'side.
<https://lh3.googleusercontent.com/-kz8qnE3-Uto/U6Bc3jxwvjI/AAAAAAAAAJo/0V2bnhmzLaA/s1600/hex.png> On Monday, June 16, 2014 7:39:41 PM UTC-7, Tiprin Lujan wrote: > > Hi everyone, I'll be building my first hexayurt this year, an H12. I was > hoping to miter the panels to eliminate some of the sunlight gaps that are > caused by Danger hinges. I'd love your opinion on this jig I made up. I > have two different blocks, one cut at 15 deg and one at 30 deg. The idea > is to screw this long razor blade onto the block and use that as a angle > cutting jig. The back of the block is straight and flat so I can clamp a > guide fence to the panel for a straight cut. What do ya think? > > > > <https://lh3.googleusercontent.com/-BkBDWw1DRHI/U5-o7v6JhVI/AAAAAAAAAJM/Aj5Iv3SoGUo/s1600/IMAG0828%5B1%5D.jpg> > > > <https://lh3.googleusercontent.com/-p9Phv8jHY6A/U5-pGatqqfI/AAAAAAAAAJU/dKoJnjlAILY/s1600/IMAG0827%5B1%5D.jpg> > > > <https://lh6.googleusercontent.com/-m0EHPapRFZ4/U5-oxA8eF8I/AAAAAAAAAJE/wS_Fd8uDl4E/s1600/IMAG0829%5B1%5D.jpg> > > On Monday, June 16, 2014 7:39:41 PM UTC-7, Tiprin Lujan wrote: > > Hi everyone, I'll be building my first hexayurt this year, an H12. I was > hoping to miter the panels to eliminate some of the sunlight gaps that are > caused by Danger hinges. I'd love your opinion on this jig I made up. I > have two different blocks, one cut at 15 deg and one at 30 deg. The idea > is to screw this long razor blade onto the block and use that as a angle > cutting jig. The back of the block is straight and flat so I can clamp a > guide fence to the panel for a straight cut. What do ya think? > > > > <https://lh3.googleusercontent.com/-BkBDWw1DRHI/U5-o7v6JhVI/AAAAAAAAAJM/Aj5Iv3SoGUo/s1600/IMAG0828%5B1%5D.jpg> > > > <https://lh3.googleusercontent.com/-p9Phv8jHY6A/U5-pGatqqfI/AAAAAAAAAJU/dKoJnjlAILY/s1600/IMAG0827%5B1%5D.jpg> > > > <https://lh6.googleusercontent.com/-m0EHPapRFZ4/U5-oxA8eF8I/AAAAAAAAAJE/wS_Fd8uDl4E/s1600/IMAG0829%5B1%5D.jpg> > > On Monday, June 16, 2014 7:39:41 PM UTC-7, Tiprin Lujan wrote: > > Hi everyone, I'll be building my first hexayurt this year, an H12. I was > hoping to miter the panels to eliminate some of the sunlight gaps that are > caused by Danger hinges. I'd love your opinion on this jig I made up. I > have two different blocks, one cut at 15 deg and one at 30 deg. The idea > is to screw this long razor blade onto the block and use that as a angle > cutting jig. The back of the block is straight and flat so I can clamp a > guide fence to the panel for a straight cut. What do ya think? > > > > <https://lh3.googleusercontent.com/-BkBDWw1DRHI/U5-o7v6JhVI/AAAAAAAAAJM/Aj5Iv3SoGUo/s1600/IMAG0828%5B1%5D.jpg> > > > <https://lh3.googleusercontent.com/-p9Phv8jHY6A/U5-pGatqqfI/AAAAAAAAAJU/dKoJnjlAILY/s1600/IMAG0827%5B1%5D.jpg> > > > <https://lh6.googleusercontent.com/-m0EHPapRFZ4/U5-oxA8eF8I/AAAAAAAAAJE/wS_Fd8uDl4E/s1600/IMAG0829%5B1%5D.jpg> > > -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/d/optout.
