Hi, On 15/09/16 12:45, Tim Coote wrote: > > I’m using hnet-full on CC 15.05.1 on Linksys wrt1200ac.
I would suggest moving to head. I spent an inordinate amount of time
trying to debug issues I was having with 15.05.1, and then found out
that upgrading to head made the network more robust.
> Additionally, this is an ADSL connection so I need a pppoe connection to
> my external modem, including a username/password. What’s the canonical
> way to add this extra step with hnetd? I can add it to a uci interface
> (even an interface not called WAN) and the connection is made, but I
> don’t know whether this will interfere with hnet.
I have a similar situation, although on a fiber connection that requires
PPPoE for IPv4. I solved it like this:
config interface 'homenet4'
option ifname 'eth0.6'
option proto 'pppoe'
option username 'username'
option password 'password'
config interface 'homenet4ext'
option ifname 'pppoe-homenet4'
option proto 'hnet'
option mode 'external'
option _orig_ifname 'pppoe-homenet4'
Basically, you "piggyback" on the interface created by PPPoE to use it
for hnet.
> I’d rather not go through the pain of building from source and adding
> debug statements, but, if necessary, I will.
Again, I suggest moving to head. You'll find more mature code.
Ciao!
--
Massimiliano Stucchi
MS16801-RIPE
signature.asc
Description: OpenPGP digital signature
_______________________________________________ homenet mailing list [email protected] https://www.ietf.org/mailman/listinfo/homenet
