quote: On my horn, the tubing is parallel throughout those slides - so the
bore doesn't change. -William /quote

This is incorrect.  If you pull the slide you change the bore of the tubing
by the thickness of the inner leg of the slide.  It is this gap to which
Steve M referred.  At one point in the 20c it was a fairly common practice
to have spacers made to fill the gap between the pulled slide and the bottom
of the outer slide leg.  Example: if you pull the first valve F slide .5"
you place two .5" spacers (one per tube) in the bottom of the outer tubes
next to the valve.  This creates a uniform tube or at the very least moves
the point of turbulence-sometimes off of a node.  I have found this makes
more of a difference on horns where the slides are pulled excessive amounts
regardless of what the reason might be for those excessive amounts of pull.

The Jack Attack!
_______________________________________________
post: [email protected]
unsubscribe or set options at 
https://pegasus.memphis.edu/cgi-bin/mailman/options/horn/archive%40jab.org

Reply via email to