I didn't consider the gap.
 
However the gap will be the same length regardless and so I don't see what  
difference it would make if any.
 
You technically have that gap at every slide that isn't pushed all the way  
in.
 
-William
 
 
In a message dated 12/1/2009 4:40:31 P.M. Eastern Standard Time,  
[email protected] writes:

Yes, but that's only true as long as the tuning  slide is pushed in all the 
way home.  When you pull the slide out, you  open up an area inside that 
now has the bore size of whatever the i.d. of your  outer tuning slide tube 
is.  On a normal horn like a Conn, that means  instead of .468, you have a 
spot that's .500 for whatever distance you pulled  the slide out.  Same idea 
for your Schmid only in some kind of metric  numbers.  There's not only a 
certain length of larger bore size, but also  a "speed bump" at either end of 
it 
where it goes back to the normal  bore.  All of that has some effect and 
the effect is different depending  on where in the the horn that you place it, 
as others have  described.
You could do away with the "gap" if you  decided how far you were going to 
pull the tuning slide and then insert a  couple of pieces of inner tubing of 
just that length.  Then you'd have an  undisturbed bore but you couldn't 
change the tuning unless you also changed  your little pieces of tubing.  Not 
having the gap might not be as good  anyway since hopefully the horn is 
designed to sound better with the slide  pulled a bit.  As I mentioned before 
though, having to pull the slide out  extra far creates a long length of 
larger bore size and that usually isn't the  best for having it play optimally. 
In that case it might help to insert some  correctly sized tubing to fill in 
some of the gap so it responds more  normally.  Reversing the slides often 
makes some difference just because  no horn is constructed absolutely 
perfectly and the little imperfections might  respond differently if you place 
them 
somewhere else.

On my horn, the  tubing is parallel throughout those slides - so the bore  
doesn't  change.

-William


In a message dated 11/30/2009 3:01:10 P.M.  Eastern Standard Time,  
[email protected] writes:

With  that 2 part tuning slide on the Schmid horn, you  open up a gap in 
the  
bore of the horn in a different place, depending on which  part of  the 
slide you pull.  That's why the response is  different.   If those slides 
will 
reverse, you might try  that too and you'll probably get a  difference in 
response that way  as well.  I'm sure somebody on the list  could come up 
with the  
number of possible permutations there would be.   Actually,  do you have to 
pull it pretty far to get it down to A=440?  It   might be interesting to 
put 
some spacers inside to fill up some of  that  gap.  The sound and response 
can get a little weird if the  tuning slide  is pulled a long way.  More 
permutations  please!

- Steve   Mumford



_______________________________________________
post:  [email protected]
unsubscribe or set options at  
https://pegasus.memphis.edu/cgi-bin/mailman/options/horn/valkhorn%40aol.com

_______________________________________________
post: [email protected]
unsubscribe or set options at 
https://pegasus.memphis.edu/cgi-bin/mailman/options/horn/archive%40jab.org

Reply via email to