Well, the original question was whether it makes a difference on the Schmid 
to pull the regular looking tuning slide part of the main tuning slide, or to 
leave that closed and pull the extension part instead, and why.  So yes it's 
true that you have the same length of gap no matter which one you pull, or you 
could split the difference and pull both of them half the distance, but either 
way you have a choice of where in the length of the horn you're going to open 
that gap.  A gap at the 24th inch is a different thing than a gap at the 28th 
inch.  Sometimes it wouldn't make much difference, sometimes a lot.  Depends on 
the horn.  

- Steve Mumford

William wrote:
I didn't consider the gap.
 
However the gap will be the same length regardless and so I don't see what  
difference it would make if any.
 
You technically have that gap at every slide that isn't pushed all the way  
in.
 
-William
 
 
_______________________________________________
post: [email protected]
unsubscribe or set options at 
https://pegasus.memphis.edu/cgi-bin/mailman/options/horn/archive%40jab.org

Reply via email to