Michael Keller wrote:
> I need an answer to this one fairly quickly.
> 
> As part of our museum renovation, we will be using both original documents
> (books, letters, certificates) and reproductions of documents (in areas
> where we don;t want to put the original on display). These repros can be
> map-sized. In our discussion today I said I didn't think my 130 would be
> good for printing on different kinds of papers (parchment, rice, whatever)
> that we'd need to use to create these fakes. I suggested that the HP Z
> printers would possibly do the job better.
> 
> What do you think? The docs may have to undergo reasonably close inspection
> (under glass cases) or not so close (on a distant wall), and they really
> want to make them look as close to original as possible (including
> distressing the "docs" after printing). Can I do this with the 130 and its
> dye inks on the proper papaers, and if not, will the Z do the job?
> 
> Thanks.

In December I reproduced 13 documents (ranging from notebook 
paper to Fabriano Ingres Cover)of the favorite museum artist 
here in town. They are on display as close as it gets in 
musea. The conservator hadn't noticed the exchange from the 
originals I was told. Z3100 prints.

The bond of the dye inks could be better than the Z3100 
pigments bond but the light and ozone fading on such a wide 
scope of media will be worse. The choices of good neutral 
B&W printing + the use of the gloss enhancer + more hues + 
more consistency in color of the Z3100 should make it the 
better printer for the job. I think the 130 doesn't allow 
thicker than 0.8 mm media either so both will have that 
limitation.



-- 
Met vriendelijke groeten,Ernst


|  Dinkla Grafische Techniek  |
|     www.pigment-print.com    |
|             ( unvollendet )            |


Website: http://groups.yahoo.com/group/HPDesignJet_Printers
Post message: [email protected] 
Subscribe: [EMAIL PROTECTED] 
Unsubscribe:  [EMAIL PROTECTED] 
List owner:  [EMAIL PROTECTED] 
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/HPDesignJet_Printers/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/HPDesignJet_Printers/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:[EMAIL PROTECTED] 
    mailto:[EMAIL PROTECTED]

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

Reply via email to