--- In [email protected], Tino Schroder <[EMAIL PROTECTED]> wrote: >
> > And as you realized.. its very important that the paper is free! The printer > is very sensitive and will stop otherwise. > It's both the roll feed and the printer with 3" cores that can give you problems. The 130nr and others using the same auto feed roller, will turn off the if the feed tension is too much. If the tension is too much for the pinch rollers a similar error will result and usually turn off the printer itself if it thinks there is a paper jam. So as other suggested, make the roll loose before starting. Never let the roll touch the housing or it will cause problems. Don't use really huge rolls if you can avoid it, the shorter rolls are better. ------------------------------------ Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
