Thanks Nick! I'll try those things. ...Dave --- On Sat, 1/3/09, Nick H. Nugent <[email protected]> wrote:
From: Nick H. Nugent <[email protected]> Subject: [HPDesignJet_Printers] Re: Designjet 130 black&white and grayscale print settings help request To: [email protected] Date: Saturday, January 3, 2009, 1:30 PM Problem with the printheads are they regularly require calibration. Sometimes they degrade so much that you need to change a head even when they look ok in a quality diagnostic print. A very small deviation in especially the LM or LC heads will cause problems with monochrome printing, less so with full color. A RIP will definitely help in achieving optimal monochrome output for these printers. You may want to try to perform a color calibration using the same media which you used initially to achieve the good quality you got with Hahnemuhle. You might also want to determine if a head needs replacement. --nick --- In HPDesignJet_ Printers@ yahoogroups. com, "davidbellm" <davidbellm@ ...> wrote: > > Hi Scott, > > I'm doing fine art prints on hanemule. At first they were coming > out unbelievably good. But now for some reason they are coming out > blueish also. In that they used to be so good I figure I have done > something to change the configuration, but I haven't figured out > what yet. My color prints are coming out great. Hmmm... > > Dave
