Actually the approach generally recommended by HP is simply press the printhead against a lint-free coffee filter moistened with distilled water. If there is a need to ensure no lint is sticking to the head I just gently rinse it under a small stream of running water under the faucet, then perform the coffee filter treatment.
But this will not cure a head that has degraded to a point beyond recovery. --nick --- In [email protected], Bill Elliott <elliott...@...> wrote: > > Knowing some devices are hyper-touchy, like ... wipe only in the > direction the print head travels, or, wipe only perpendicular to the > direction the print head travels. I would assume some kind of "lint > free' cloth is .. recommended, or essential? > > Thanks, again, in advance. > Bill ------------------------------------ Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [email protected] Unsubscribe: [email protected] List owner: [email protected] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[email protected] mailto:[email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
