Everything looks okay there. Are you using the pre-installed hplip or did
you install from source?
On 4/10/07, Khalid Luqman <[EMAIL PROTECTED]> wrote:
heres the output of cat /etc/hosts
127.0.0.1 localhost
127.0.1.1 khalid-laptop
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
On 4/10/07, Aaron < [EMAIL PROTECTED]> wrote:
>
> can you run:
>
> cat /etc/hosts
>
> and post the output?
>
> A
>
> On 4/10/07, Khalid Luqman < [EMAIL PROTECTED] > wrote:
> >
> > Nope, Im still getting the error. While restarting hplip, no messages
> > show up in /var/log/messages.
> > What are my options, if any?
> >
> > On 4/10/07, Aaron < [EMAIL PROTECTED]> wrote:
> > >
> > > Please run:
> > >
> > > sudo /etc/init.d/hplip restart && sudo /etc/init.d/cupsys restart &&
> > > hp-toolbox
> > >
> > > If you still get the i/o error run:
> > >
> > > sudo tail -f /var/log/messages
> > >
> > > and then in another terminal window run:
> > >
> > > sudo /etc/init.d/hplip restart
> > >
> > > and post any output in /var/log/messages.
> > >
> > > A
> > >
> > > On 4/10/07, Khalid Luqman < [EMAIL PROTECTED]> wrote:
> > >
> > > > Hi,
> > > > I need help and I have gone through countless forums without any
> > > > results. While using ubuntu 6.10 the F380 was fully functional but
> > > > due to networking issues I decided to upgrade to the ubuntu feisty
> > > > 7.04 beta. However, after this, when I tried to scan using the
> > > > xsane frontend my scanner was not found (the printer still works
though).
> > > >
> > > >
> > > > the error that keeps on popping up is...
> > > > error: Unable to connect to HPLIP I/O (hpiod).
> > > >
> > > >
> > > > commands and output
> > > > hp-setup
> > > >
> > > > [EMAIL PROTECTED]:~$ sudo hp-setup
> > > > Password:
> > > > Sorry, try again.
> > > > Password:
> > > >
> > > > HP Linux Imaging and Printing System (ver. 1.7.3)
> > > > Printer/Fax Setup Utility ver. 4.5
> > > >
> > > > Copyright (c) 2001-7 Hewlett-Packard Development Company, LP
> > > > This software comes with ABSOLUTELY NO WARRANTY.
> > > > This is free software, and you are welcome to distribute it
> > > > under certain conditions. See COPYING file for more details.
> > > >
> > > > error: Unable to connect to hpiod.
> > > > error: Unable to connect to HPLIP I/O. Please (re)start HPLIP and
> > > > try again.
> > > > [EMAIL PROTECTED]:~$ sudo /etc/init.d/hplip restart
> > > > * Stopping HP Linux Printing and Imaging
> > > > System [ OK ]
> > > > * Starting HP Linux Printing and Imaging
> > > > System [ OK ]
> > > > [EMAIL PROTECTED]:~$ sudo hp-setup
> > > >
> > > > HP Linux Imaging and Printing System (ver. 1.7.3)
> > > > Printer/Fax Setup Utility ver. 4.5
> > > >
> > > > Copyright (c) 2001-7 Hewlett-Packard Development Company, LP
> > > > This software comes with ABSOLUTELY NO WARRANTY.
> > > > This is free software, and you are welcome to distribute it
> > > > under certain conditions. See COPYING file for more details.
> > > >
> > > > error: Unable to connect to hpiod.
> > > > error: Unable to connect to HPLIP I/O. Please (re)start HPLIP and
> > > > try again.
> > > > [EMAIL PROTECTED]:~$
> > > >
> > > > hplip toolbox (does not open in the menu)
> > > >
> > > > [EMAIL PROTECTED]:~$ hp-toolbox
> > > >
> > > > HP Linux Imaging and Printing System (ver. 1.7.3)
> > > > HP Device Manager ver. 9.0
> > > >
> > > > Copyright (c) 2001-7 Hewlett-Packard Development Company, LP
> > > > This software comes with ABSOLUTELY NO WARRANTY.
> > > > This is free software, and you are welcome to distribute it
> > > > under certain conditions. See COPYING file for more details.
> > > >
> > > > error: Unable to connect to HPLIP I/O (hpiod).
> > > >
> > > > hp-check
> > > >
> > > > HP Linux Imaging and Printing System (ver. 1.7.3)
> > > > Dependency/Version Check Utility ver. 5.3
> > > >
> > > > Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
> > > > This software comes with ABSOLUTELY NO WARRANTY.
> > > > This is free software, and you are welcome to distribute it
> > > > under certain conditions. See COPYING file for more details.
> > > >
> > > >
> > > > ---------------
> > > > | SYSTEM INFO |
> > > > ---------------
> > > >
> > > > Basic system information:
> > > > Linux khalid-laptop 2.6.20-14-generic #2 SMP Mon Apr 2 20:37:49
> > > > UTC 2007 i686 GNU/Linux
> > > >
> > > > Detected distro (/etc/issue):
> > > > ubuntu 7.04
> > > >
> > > > Detected distro (lsb_release):
> > > > Ubuntu 7.04 (feisty)
> > > >
> > > > Currently installed HPLIP version...
> > > > HPLIP 1.7.3 currently installed in '/usr/lib/hplip'.
> > > >
> > > > Current contents of '/etc/hp/hplip.conf' file:
> > > > # hplip.conf
> > > >
> > > > [hpiod]
> > > > # port=0 (dynamic IP port)
> > > > port=2208
> > > > [hpssd]
> > > > # port=0 (dynamic IP port)
> > > > port=2207
> > > >
> > > > [hplip]
> > > > version=1.7.3
> > > > jdprobe=0
> > > >
> > > > [dirs]
> > > > home=/usr/lib/hplip
> > > > run=/var/run/hplip
> > > > ppd=/usr/share/ppd
> > > > doc=/usr/share/doc/hplip-doc/HTML
> > > >
> > > > # Following values are determined at configure time and cannot be
> > > > changed.
> > > > [configure]
> > > > network-build=1
> > > > pp-build=1
> > > > gui-build=1
> > > > scanner-build=1
> > > > fax-build=1
> > > > cups11-build=0
> > > >
> > > >
> > > > HPLIP running?
> > > > No, HPLIP is not running (OK).
> > > >
> > > > HPOJ running?
> > > > No, HPOJ is not running (OK).
> > > >
> > > > Checking Python version...
> > > > OK, version 2.5.1 installed
> > > >
> > > > Checking PyQt version...
> > > > OK, version 3.17 installed.
> > > >
> > > > Checking SIP version...
> > > > OK, Version 4.5 installed
> > > >
> > > > ----------------
> > > > | DEPENDENCIES |
> > > > ----------------
> > > >
> > > >
> > > > Checking for dependency libcrypto - OpenSSL cryptographic
> > > > library...
> > > > OK, found.
> > > >
> > > > Checking for dependency gcc - GNU Project C and C++ Compiler...
> > > > OK, found.
> > > >
> > > > Checking for dependency SANE - Scanning library...
> > > > OK, found.
> > > >
> > > > Checking for dependency GhostScript - PostScript and PDF language
> > > > interpreter and previewer...
> > > > OK, found.
> > > >
> > > > Checking for dependency libjpeg - JPEG library...
> > > > OK, found.
> > > >
> > > > Checking for dependency libpthread - POSIX threads library...
> > > > OK, found.
> > > >
> > > > Checking for dependency make - GNU make utility to maintain groups
> > > > of programs...
> > > > OK, found.
> > > >
> > > > Checking for dependency python-devel - Python development files...
> > > > OK, found.
> > > >
> > > > Checking for dependency Reportlab - PDF library for Python...
> > > > OK, found.
> > > >
> > > > Checking for dependency PyQt - Qt interface for Python...
> > > > OK, found.
> > > >
> > > > Checking for dependency cups-devel- Common Unix Printing System
> > > > development files...
> > > > OK, found.
> > > >
> > > > Checking for dependency ppdev - Parallel port support kernel
> > > > module....
> > > > OK, found.
> > > >
> > > > Checking for dependency libusb - USB library...
> > > > OK, found.
> > > >
> > > > Checking for dependency scanimage - Shell scanning program...
> > > > OK, found.
> > > >
> > > > Checking for dependency libnetsnmp-devel - SNMP networking library
> > > > development files...
> > > > OK, found.
> > > >
> > > > Checking for dependency Python 2.2 or greater - Python programming
> > > > language...
> > > > OK, found.
> > > >
> > > > Checking for dependency LSB - Linux Standard Base support...
> > > > OK, found.
> > > >
> > > > Checking for dependency xsane - Graphical scanner frontend for
> > > > SANE...
> > > > OK, found.
> > > >
> > > > Checking for dependency cups - Common Unix Printing System...
> > > > OK, found.
> > > >
> > > > Checking for dependency Python 2.3 or greater - Required for fax
> > > > functionality...
> > > > OK, found.
> > > >
> > > >
> > > > ----------------------
> > > > | INSTALLED PRINTERS |
> > > > ----------------------
> > > >
> > > >
> > > > DeskJet-F300
> > > > ------------
> > > > Device URI: usb://HP/Deskjet%20F300%20series?serial=CN65CF80SJ04KH
> > > > Installed in HPLIP? No
> > > > PPD: /etc/cups/ppd/DeskJet-F300.ppd
> > > > PPD Description: HP DeskJet F300 Foomatic/hpijs (recommended)
> > > > Printer status: printer DeskJet-F300 is idle. enabled since Wed 04
> > > > Apr 2007 08:14:33 PM PDT
> > > >
> > > > error: Printer is not HPLIP installed. Printers must use the hp:
> > > > or hpfax: CUPS backend to function in HPLIP. (You can still print to
this
> > > > printer using another backend and HPIJS.)
> > > >
> > > >
> > > > ----------------------
> > > > | SANE CONFIGURATION |
> > > > ----------------------
> > > >
> > > > 'hpaio' in '/etc/sane.d/dll.conf'...
> > > > OK, found. SANE backend 'hpaio' is properly set up.
> > > >
> > > > Checking output of 'scanimage -L'...
> > > >
> > > > No scanners were identified. If you were expecting something
> > > > different,
> > > > check that the scanner is plugged in, turned on and detected by
> > > > the
> > > > sane-find-scanner tool (if appropriate). Please read the
> > > > documentation
> > > > which came with this software (README, FAQ, manpages).
> > > >
> > > >
> > > > ---------------------
> > > > | PYTHON EXTENSIONS |
> > > > ---------------------
> > > >
> > > > Checking 'cupsext' CUPS extension...
> > > > OK, found.
> > > >
> > > > Checking 'pcardext' Photocard extension...
> > > > OK, found.
> > > >
> > > >
> > > > 1 errors were detected.
> > > > Please refer to the installation instructions at:
> > > > http://hplip.sourceforge.net/install/index.html
> > > >
> > > > sane-find-scanner utility
> > > >
> > > > # sane-find-scanner will now attempt to detect your scanner. If
> > > > the
> > > > # result is different from what you expected, first make sure your
> > > > # scanner is powered up and properly connected to your computer.
> > > >
> > > > # No SCSI scanners found. If you expected something different,
> > > > make sure that
> > > > # you have loaded a kernel SCSI driver for your SCSI adapter.
> > > >
> > > > found USB scanner (vendor=0x03f0 [HP], product=0x5511 [Deskjet
> > > > F300 series]) at libusb:001:002
> > > > # Your USB scanner was (probably) detected. It may or may not be
> > > > supported by
> > > > # SANE. Try scanimage -L and read the backend's manpage.
> > > >
> > > > # Not checking for parallel port scanners.
> > > >
> > > > # Most Scanners connected to the parallel port or other
> > > > proprietary ports
> > > > # can't be detected by this program.
> > > >
> > > > # You may want to run this program as root to find all devices.
> > > > Once you
> > > > # found the scanner devices, be sure to adjust access permissions
> > > > as
> > > > # necessary.
> > > >
> > > > [EMAIL PROTECTED]:~$ scanimage -L
> > > >
> > > > No scanners were identified. If you were expecting something
> > > > different,
> > > > check that the scanner is plugged in, turned on and detected by
> > > > the
> > > > sane-find-scanner tool (if appropriate). Please read the
> > > > documentation
> > > > which came with this software (README, FAQ, manpages).
> > > >
> > > >
> > > >
> > > > Thanks for the help!
> > > >
> > > > --
> > > > theonlykman
> > > >
> > > >
-------------------------------------------------------------------------
> > > > Take Surveys. Earn Cash. Influence the Future of IT
> > > > Join SourceForge.net's Techsay panel and you'll get the chance to
> > > > share your
> > > > opinions on IT & business topics through brief surveys-and earn
> > > > cash
> > > >
> > > >
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> > > > _______________________________________________
> > > > HPLIP-Help mailing list
> > > > HPLIP-Help@lists.sourceforge.net
> > > > https://lists.sourceforge.net/lists/listinfo/hplip-help
> > > >
> > > >
> > >
> > >
> > > --
> > > I don't care, I'm still free. You can't take the sky from me. -
> > > "Firefly"
> > > -
> > > Ubuntu User: #11105
> > > Ubuntu Linux http://ubuntulinux.org
> >
> >
>
>
> --
> I don't care, I'm still free. You can't take the sky from me. -
> "Firefly"
> -
> Ubuntu User: #11105
> Ubuntu Linux http://ubuntulinux.org
>
--
Khalid Luqman
--
I don't care, I'm still free. You can't take the sky from me. - "Firefly"
-
Ubuntu User: #11105
Ubuntu Linux http://ubuntulinux.org
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help
