Is there some process by which I can manually remove hplip completely or
should I just uninstall it through synaptic?
On 4/10/07, Aaron <[EMAIL PROTECTED]> wrote:
You can give it a try, can't hurt. I'm doing the updates for fiesty now,
have another 20min or so to go.
A
On 4/10/07, Khalid Luqman < [EMAIL PROTECTED]> wrote:
>
> Would removing hplip and then reinstalling it be worth it?
>
> On 4/10/07, Aaron < [EMAIL PROTECTED]> wrote:
>
> > I'm going to do a test with feisty. It's been pretty heavily tested
> > by the ubuntu team so I'd be surprised if something had gotten through their
> > testing efforts. I'll try and reproduce and get back to you in about an
> > hour or hour and half or so.
> >
> > A
> >
> > On 4/10/07, Khalid Luqman < [EMAIL PROTECTED]> wrote:
> > >
> > > Preinstalled (1.7.3) and I guess release updates have been through
> > > synaptic.
> > >
> > > On 4/10/07, Aaron < [EMAIL PROTECTED]> wrote:
> > > >
> > > > Everything looks okay there. Are you using the pre-installed
> > > > hplip or did you install from source?
> > > >
> > > > On 4/10/07, Khalid Luqman < [EMAIL PROTECTED]> wrote:
> > > > >
> > > > > heres the output of cat /etc/hosts
> > > > > 127.0.0.1 localhost
> > > > > 127.0.1.1 khalid-laptop
> > > > >
> > > > > # The following lines are desirable for IPv6 capable hosts
> > > > > ::1 ip6-localhost ip6-loopback
> > > > > fe00::0 ip6-localnet
> > > > > ff00::0 ip6-mcastprefix
> > > > > ff02::1 ip6-allnodes
> > > > > ff02::2 ip6-allrouters
> > > > > ff02::3 ip6-allhosts
> > > > >
> > > > >
> > > > > On 4/10/07, Aaron < [EMAIL PROTECTED]> wrote:
> > > > > >
> > > > > > can you run:
> > > > > >
> > > > > > cat /etc/hosts
> > > > > >
> > > > > > and post the output?
> > > > > >
> > > > > > A
> > > > > >
> > > > > > On 4/10/07, Khalid Luqman < [EMAIL PROTECTED] > wrote:
> > > > > > >
> > > > > > > Nope, Im still getting the error. While restarting hplip, no
> > > > > > > messages show up in /var/log/messages.
> > > > > > > What are my options, if any?
> > > > > > >
> > > > > > > On 4/10/07, Aaron < [EMAIL PROTECTED]> wrote:
> > > > > > > >
> > > > > > > > Please run:
> > > > > > > >
> > > > > > > > sudo /etc/init.d/hplip restart && sudo /etc/init.d/cupsys
> > > > > > > > restart && hp-toolbox
> > > > > > > >
> > > > > > > > If you still get the i/o error run:
> > > > > > > >
> > > > > > > > sudo tail -f /var/log/messages
> > > > > > > >
> > > > > > > > and then in another terminal window run:
> > > > > > > >
> > > > > > > > sudo /etc/init.d/hplip restart
> > > > > > > >
> > > > > > > > and post any output in /var/log/messages.
> > > > > > > >
> > > > > > > > A
> > > > > > > >
> > > > > > > > On 4/10/07, Khalid Luqman < [EMAIL PROTECTED]> wrote:
> > > > > > > >
> > > > > > > > > Hi,
> > > > > > > > > I need help and I have gone through countless forums
> > > > > > > > > without any results. While using ubuntu 6.10 the F380
> > > > > > > > > was fully functional but due to networking issues I decided
to upgrade to
> > > > > > > > > the ubuntu feisty 7.04 beta. However, after this, when I
> > > > > > > > > tried to scan using the xsane frontend my scanner was not
found (the printer
> > > > > > > > > still works though).
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > the error that keeps on popping up is...
> > > > > > > > > error: Unable to connect to HPLIP I/O (hpiod).
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > commands and output
> > > > > > > > > hp-setup
> > > > > > > > >
> > > > > > > > > [EMAIL PROTECTED]:~$ sudo hp-setup
> > > > > > > > > Password:
> > > > > > > > > Sorry, try again.
> > > > > > > > > Password:
> > > > > > > > >
> > > > > > > > > HP Linux Imaging and Printing System (ver. 1.7.3)
> > > > > > > > > Printer/Fax Setup Utility ver. 4.5
> > > > > > > > >
> > > > > > > > > Copyright (c) 2001-7 Hewlett-Packard Development
> > > > > > > > > Company, LP
> > > > > > > > > This software comes with ABSOLUTELY NO WARRANTY.
> > > > > > > > > This is free software, and you are welcome to distribute
> > > > > > > > > it
> > > > > > > > > under certain conditions. See COPYING file for more
> > > > > > > > > details.
> > > > > > > > >
> > > > > > > > > error: Unable to connect to hpiod.
> > > > > > > > > error: Unable to connect to HPLIP I/O. Please (re)start
> > > > > > > > > HPLIP and try again.
> > > > > > > > > [EMAIL PROTECTED]:~$ sudo /etc/init.d/hplip restart
> > > > > > > > > * Stopping HP Linux Printing and Imaging
> > > > > > > > > System [ OK ]
> > > > > > > > > * Starting HP Linux Printing and Imaging
> > > > > > > > > System [ OK ]
> > > > > > > > > [EMAIL PROTECTED]:~$ sudo hp-setup
> > > > > > > > >
> > > > > > > > > HP Linux Imaging and Printing System (ver. 1.7.3)
> > > > > > > > > Printer/Fax Setup Utility ver. 4.5
> > > > > > > > >
> > > > > > > > > Copyright (c) 2001-7 Hewlett-Packard Development
> > > > > > > > > Company, LP
> > > > > > > > > This software comes with ABSOLUTELY NO WARRANTY.
> > > > > > > > > This is free software, and you are welcome to distribute
> > > > > > > > > it
> > > > > > > > > under certain conditions. See COPYING file for more
> > > > > > > > > details.
> > > > > > > > >
> > > > > > > > > error: Unable to connect to hpiod.
> > > > > > > > > error: Unable to connect to HPLIP I/O. Please (re)start
> > > > > > > > > HPLIP and try again.
> > > > > > > > > [EMAIL PROTECTED]:~$
> > > > > > > > >
> > > > > > > > > hplip toolbox (does not open in the menu)
> > > > > > > > >
> > > > > > > > > [EMAIL PROTECTED]:~$ hp-toolbox
> > > > > > > > >
> > > > > > > > > HP Linux Imaging and Printing System (ver. 1.7.3)
> > > > > > > > > HP Device Manager ver. 9.0
> > > > > > > > >
> > > > > > > > > Copyright (c) 2001-7 Hewlett-Packard Development
> > > > > > > > > Company, LP
> > > > > > > > > This software comes with ABSOLUTELY NO WARRANTY.
> > > > > > > > > This is free software, and you are welcome to distribute
> > > > > > > > > it
> > > > > > > > > under certain conditions. See COPYING file for more
> > > > > > > > > details.
> > > > > > > > >
> > > > > > > > > error: Unable to connect to HPLIP I/O (hpiod).
> > > > > > > > >
> > > > > > > > > hp-check
> > > > > > > > >
> > > > > > > > > HP Linux Imaging and Printing System (ver. 1.7.3)
> > > > > > > > > Dependency/Version Check Utility ver. 5.3
> > > > > > > > >
> > > > > > > > > Copyright (c) 2003-6 Hewlett-Packard Development
> > > > > > > > > Company, LP
> > > > > > > > > This software comes with ABSOLUTELY NO WARRANTY.
> > > > > > > > > This is free software, and you are welcome to distribute
> > > > > > > > > it
> > > > > > > > > under certain conditions. See COPYING file for more
> > > > > > > > > details.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > ---------------
> > > > > > > > > | SYSTEM INFO |
> > > > > > > > > ---------------
> > > > > > > > >
> > > > > > > > > Basic system information:
> > > > > > > > > Linux khalid-laptop 2.6.20-14-generic #2 SMP Mon Apr 2
> > > > > > > > > 20:37:49 UTC 2007 i686 GNU/Linux
> > > > > > > > >
> > > > > > > > > Detected distro (/etc/issue):
> > > > > > > > > ubuntu 7.04
> > > > > > > > >
> > > > > > > > > Detected distro (lsb_release):
> > > > > > > > > Ubuntu 7.04 (feisty)
> > > > > > > > >
> > > > > > > > > Currently installed HPLIP version...
> > > > > > > > > HPLIP 1.7.3 currently installed in '/usr/lib/hplip'.
> > > > > > > > >
> > > > > > > > > Current contents of '/etc/hp/hplip.conf' file:
> > > > > > > > > # hplip.conf
> > > > > > > > >
> > > > > > > > > [hpiod]
> > > > > > > > > # port=0 (dynamic IP port)
> > > > > > > > > port=2208
> > > > > > > > > [hpssd]
> > > > > > > > > # port=0 (dynamic IP port)
> > > > > > > > > port=2207
> > > > > > > > >
> > > > > > > > > [hplip]
> > > > > > > > > version=1.7.3
> > > > > > > > > jdprobe=0
> > > > > > > > >
> > > > > > > > > [dirs]
> > > > > > > > > home=/usr/lib/hplip
> > > > > > > > > run=/var/run/hplip
> > > > > > > > > ppd=/usr/share/ppd
> > > > > > > > > doc=/usr/share/doc/hplip-doc/HTML
> > > > > > > > >
> > > > > > > > > # Following values are determined at configure time and
> > > > > > > > > cannot be changed.
> > > > > > > > > [configure]
> > > > > > > > > network-build=1
> > > > > > > > > pp-build=1
> > > > > > > > > gui-build=1
> > > > > > > > > scanner-build=1
> > > > > > > > > fax-build=1
> > > > > > > > > cups11-build=0
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > HPLIP running?
> > > > > > > > > No, HPLIP is not running (OK).
> > > > > > > > >
> > > > > > > > > HPOJ running?
> > > > > > > > > No, HPOJ is not running (OK).
> > > > > > > > >
> > > > > > > > > Checking Python version...
> > > > > > > > > OK, version 2.5.1 installed
> > > > > > > > >
> > > > > > > > > Checking PyQt version...
> > > > > > > > > OK, version 3.17 installed.
> > > > > > > > >
> > > > > > > > > Checking SIP version...
> > > > > > > > > OK, Version 4.5 installed
> > > > > > > > >
> > > > > > > > > ----------------
> > > > > > > > > | DEPENDENCIES |
> > > > > > > > > ----------------
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Checking for dependency libcrypto - OpenSSL
> > > > > > > > > cryptographic library...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > > Checking for dependency gcc - GNU Project C and C++
> > > > > > > > > Compiler...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > > Checking for dependency SANE - Scanning library...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > > Checking for dependency GhostScript - PostScript and PDF
> > > > > > > > > language interpreter and previewer...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > > Checking for dependency libjpeg - JPEG library...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > > Checking for dependency libpthread - POSIX threads
> > > > > > > > > library...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > > Checking for dependency make - GNU make utility to
> > > > > > > > > maintain groups of programs...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > > Checking for dependency python-devel - Python
> > > > > > > > > development files...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > > Checking for dependency Reportlab - PDF library for
> > > > > > > > > Python...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > > Checking for dependency PyQt - Qt interface for
> > > > > > > > > Python...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > > Checking for dependency cups-devel- Common Unix Printing
> > > > > > > > > System development files...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > > Checking for dependency ppdev - Parallel port support
> > > > > > > > > kernel module....
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > > Checking for dependency libusb - USB library...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > > Checking for dependency scanimage - Shell scanning
> > > > > > > > > program...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > > Checking for dependency libnetsnmp-devel - SNMP
> > > > > > > > > networking library development files...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > > Checking for dependency Python 2.2 or greater - Python
> > > > > > > > > programming language...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > > Checking for dependency LSB - Linux Standard Base
> > > > > > > > > support...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > > Checking for dependency xsane - Graphical scanner
> > > > > > > > > frontend for SANE...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > > Checking for dependency cups - Common Unix Printing
> > > > > > > > > System...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > > Checking for dependency Python 2.3 or greater - Required
> > > > > > > > > for fax functionality...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > ----------------------
> > > > > > > > > | INSTALLED PRINTERS |
> > > > > > > > > ----------------------
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > DeskJet-F300
> > > > > > > > > ------------
> > > > > > > > > Device URI:
> > > > > > > > > usb://HP/Deskjet%20F300%20series?serial=CN65CF80SJ04KH
> > > > > > > > > Installed in HPLIP? No
> > > > > > > > > PPD: /etc/cups/ppd/DeskJet-F300.ppd
> > > > > > > > > PPD Description: HP DeskJet F300 Foomatic/hpijs
> > > > > > > > > (recommended)
> > > > > > > > > Printer status: printer DeskJet-F300 is idle. enabled
> > > > > > > > > since Wed 04 Apr 2007 08:14:33 PM PDT
> > > > > > > > >
> > > > > > > > > error: Printer is not HPLIP installed. Printers must use
> > > > > > > > > the hp: or hpfax: CUPS backend to function in HPLIP. (You can
still print to
> > > > > > > > > this printer using another backend and HPIJS.)
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > ----------------------
> > > > > > > > > | SANE CONFIGURATION |
> > > > > > > > > ----------------------
> > > > > > > > >
> > > > > > > > > 'hpaio' in '/etc/sane.d/dll.conf'...
> > > > > > > > > OK, found. SANE backend 'hpaio' is properly set up.
> > > > > > > > >
> > > > > > > > > Checking output of 'scanimage -L'...
> > > > > > > > >
> > > > > > > > > No scanners were identified. If you were expecting
> > > > > > > > > something different,
> > > > > > > > > check that the scanner is plugged in, turned on and
> > > > > > > > > detected by the
> > > > > > > > > sane-find-scanner tool (if appropriate). Please read the
> > > > > > > > > documentation
> > > > > > > > > which came with this software (README, FAQ, manpages).
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > ---------------------
> > > > > > > > > | PYTHON EXTENSIONS |
> > > > > > > > > ---------------------
> > > > > > > > >
> > > > > > > > > Checking 'cupsext' CUPS extension...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > > Checking 'pcardext' Photocard extension...
> > > > > > > > > OK, found.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > 1 errors were detected.
> > > > > > > > > Please refer to the installation instructions at:
> > > > > > > > > http://hplip.sourceforge.net/install/index.html
> > > > > > > > >
> > > > > > > > > sane-find-scanner utility
> > > > > > > > >
> > > > > > > > > # sane-find-scanner will now attempt to detect your
> > > > > > > > > scanner. If the
> > > > > > > > > # result is different from what you expected, first make
> > > > > > > > > sure your
> > > > > > > > > # scanner is powered up and properly connected to your
> > > > > > > > > computer.
> > > > > > > > >
> > > > > > > > > # No SCSI scanners found. If you expected something
> > > > > > > > > different, make sure that
> > > > > > > > > # you have loaded a kernel SCSI driver for your SCSI
> > > > > > > > > adapter.
> > > > > > > > >
> > > > > > > > > found USB scanner (vendor=0x03f0 [HP], product=0x5511
> > > > > > > > > [Deskjet F300 series]) at libusb:001:002
> > > > > > > > > # Your USB scanner was (probably) detected. It may or
> > > > > > > > > may not be supported by
> > > > > > > > > # SANE. Try scanimage -L and read the backend's manpage.
> > > > > > > > >
> > > > > > > > > # Not checking for parallel port scanners.
> > > > > > > > >
> > > > > > > > > # Most Scanners connected to the parallel port or other
> > > > > > > > > proprietary ports
> > > > > > > > > # can't be detected by this program.
> > > > > > > > >
> > > > > > > > > # You may want to run this program as root to find all
> > > > > > > > > devices. Once you
> > > > > > > > > # found the scanner devices, be sure to adjust access
> > > > > > > > > permissions as
> > > > > > > > > # necessary.
> > > > > > > > >
> > > > > > > > > [EMAIL PROTECTED]:~$ scanimage -L
> > > > > > > > >
> > > > > > > > > No scanners were identified. If you were expecting
> > > > > > > > > something different,
> > > > > > > > > check that the scanner is plugged in, turned on and
> > > > > > > > > detected by the
> > > > > > > > > sane-find-scanner tool (if appropriate). Please read the
> > > > > > > > > documentation
> > > > > > > > > which came with this software (README, FAQ, manpages).
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Thanks for the help!
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > theonlykman
> > > > > > > > >
> > > > > > > > >
-------------------------------------------------------------------------
> > > > > > > > > Take Surveys. Earn Cash. Influence the Future of IT
> > > > > > > > > Join SourceForge.net's Techsay panel and you'll get the
> > > > > > > > > chance to share your
> > > > > > > > > opinions on IT & business topics through brief
> > > > > > > > > surveys-and earn cash
> > > > > > > > >
> > > > > > > > >
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> > > > > > > > > _______________________________________________
> > > > > > > > > HPLIP-Help mailing list
> > > > > > > > > HPLIP-Help@lists.sourceforge.net
> > > > > > > > > https://lists.sourceforge.net/lists/listinfo/hplip-help
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > I don't care, I'm still free. You can't take the sky from
> > > > > > > > me. - "Firefly"
> > > > > > > > -
> > > > > > > > Ubuntu User: #11105
> > > > > > > > Ubuntu Linux http://ubuntulinux.org
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > I don't care, I'm still free. You can't take the sky from me.
> > > > > > - "Firefly"
> > > > > > -
> > > > > > Ubuntu User: #11105
> > > > > > Ubuntu Linux http://ubuntulinux.org
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Khalid Luqman
> > > >
> > > >
> > > >
> > > >
> > > > --
> > > > I don't care, I'm still free. You can't take the sky from me. -
> > > > "Firefly"
> > > > -
> > > > Ubuntu User: #11105
> > > > Ubuntu Linux http://ubuntulinux.org
> > > >
> > >
> > >
> > >
> > > --
> > > Khalid Luqman
> >
> >
> >
> >
> > --
> > I don't care, I'm still free. You can't take the sky from me. -
> > "Firefly"
> > -
> > Ubuntu User: #11105
> > Ubuntu Linux http://ubuntulinux.org
> >
>
>
>
> --
> Khalid Luqman
--
I don't care, I'm still free. You can't take the sky from me. - "Firefly"
-
Ubuntu User: #11105
Ubuntu Linux http://ubuntulinux.org
--
Khalid Luqman
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help
