Would removing hplip and then reinstalling it be worth it?
On 4/10/07, Aaron <[EMAIL PROTECTED]> wrote:
I'm going to do a test with feisty. It's been pretty heavily tested by
the ubuntu team so I'd be surprised if something had gotten through their
testing efforts. I'll try and reproduce and get back to you in about an
hour or hour and half or so.
A
On 4/10/07, Khalid Luqman <[EMAIL PROTECTED]> wrote:
>
> Preinstalled (1.7.3) and I guess release updates have been through
> synaptic.
>
> On 4/10/07, Aaron < [EMAIL PROTECTED]> wrote:
> >
> > Everything looks okay there. Are you using the pre-installed hplip or
> > did you install from source?
> >
> > On 4/10/07, Khalid Luqman < [EMAIL PROTECTED]> wrote:
> > >
> > > heres the output of cat /etc/hosts
> > > 127.0.0.1 localhost
> > > 127.0.1.1 khalid-laptop
> > >
> > > # The following lines are desirable for IPv6 capable hosts
> > > ::1 ip6-localhost ip6-loopback
> > > fe00::0 ip6-localnet
> > > ff00::0 ip6-mcastprefix
> > > ff02::1 ip6-allnodes
> > > ff02::2 ip6-allrouters
> > > ff02::3 ip6-allhosts
> > >
> > >
> > > On 4/10/07, Aaron < [EMAIL PROTECTED]> wrote:
> > > >
> > > > can you run:
> > > >
> > > > cat /etc/hosts
> > > >
> > > > and post the output?
> > > >
> > > > A
> > > >
> > > > On 4/10/07, Khalid Luqman < [EMAIL PROTECTED] > wrote:
> > > > >
> > > > > Nope, Im still getting the error. While restarting hplip, no
> > > > > messages show up in /var/log/messages.
> > > > > What are my options, if any?
> > > > >
> > > > > On 4/10/07, Aaron < [EMAIL PROTECTED]> wrote:
> > > > > >
> > > > > > Please run:
> > > > > >
> > > > > > sudo /etc/init.d/hplip restart && sudo /etc/init.d/cupsys
> > > > > > restart && hp-toolbox
> > > > > >
> > > > > > If you still get the i/o error run:
> > > > > >
> > > > > > sudo tail -f /var/log/messages
> > > > > >
> > > > > > and then in another terminal window run:
> > > > > >
> > > > > > sudo /etc/init.d/hplip restart
> > > > > >
> > > > > > and post any output in /var/log/messages.
> > > > > >
> > > > > > A
> > > > > >
> > > > > > On 4/10/07, Khalid Luqman < [EMAIL PROTECTED]> wrote:
> > > > > >
> > > > > > > Hi,
> > > > > > > I need help and I have gone through countless forums without
> > > > > > > any results. While using ubuntu 6.10 the F380 was fully
> > > > > > > functional but due to networking issues I decided to upgrade to
the ubuntu
> > > > > > > feisty 7.04 beta. However, after this, when I tried to scan
> > > > > > > using the xsane frontend my scanner was not found (the printer
still works
> > > > > > > though).
> > > > > > >
> > > > > > >
> > > > > > > the error that keeps on popping up is...
> > > > > > > error: Unable to connect to HPLIP I/O (hpiod).
> > > > > > >
> > > > > > >
> > > > > > > commands and output
> > > > > > > hp-setup
> > > > > > >
> > > > > > > [EMAIL PROTECTED]:~$ sudo hp-setup
> > > > > > > Password:
> > > > > > > Sorry, try again.
> > > > > > > Password:
> > > > > > >
> > > > > > > HP Linux Imaging and Printing System (ver. 1.7.3)
> > > > > > > Printer/Fax Setup Utility ver. 4.5
> > > > > > >
> > > > > > > Copyright (c) 2001-7 Hewlett-Packard Development Company, LP
> > > > > > > This software comes with ABSOLUTELY NO WARRANTY.
> > > > > > > This is free software, and you are welcome to distribute it
> > > > > > > under certain conditions. See COPYING file for more details.
> > > > > > >
> > > > > > > error: Unable to connect to hpiod.
> > > > > > > error: Unable to connect to HPLIP I/O. Please (re)start
> > > > > > > HPLIP and try again.
> > > > > > > [EMAIL PROTECTED]:~$ sudo /etc/init.d/hplip restart
> > > > > > > * Stopping HP Linux Printing and Imaging
> > > > > > > System [ OK ]
> > > > > > > * Starting HP Linux Printing and Imaging
> > > > > > > System [ OK ]
> > > > > > > [EMAIL PROTECTED]:~$ sudo hp-setup
> > > > > > >
> > > > > > > HP Linux Imaging and Printing System (ver. 1.7.3)
> > > > > > > Printer/Fax Setup Utility ver. 4.5
> > > > > > >
> > > > > > > Copyright (c) 2001-7 Hewlett-Packard Development Company, LP
> > > > > > > This software comes with ABSOLUTELY NO WARRANTY.
> > > > > > > This is free software, and you are welcome to distribute it
> > > > > > > under certain conditions. See COPYING file for more details.
> > > > > > >
> > > > > > > error: Unable to connect to hpiod.
> > > > > > > error: Unable to connect to HPLIP I/O. Please (re)start
> > > > > > > HPLIP and try again.
> > > > > > > [EMAIL PROTECTED]:~$
> > > > > > >
> > > > > > > hplip toolbox (does not open in the menu)
> > > > > > >
> > > > > > > [EMAIL PROTECTED]:~$ hp-toolbox
> > > > > > >
> > > > > > > HP Linux Imaging and Printing System (ver. 1.7.3)
> > > > > > > HP Device Manager ver. 9.0
> > > > > > >
> > > > > > > Copyright (c) 2001-7 Hewlett-Packard Development Company, LP
> > > > > > > This software comes with ABSOLUTELY NO WARRANTY.
> > > > > > > This is free software, and you are welcome to distribute it
> > > > > > > under certain conditions. See COPYING file for more details.
> > > > > > >
> > > > > > >
> > > > > > > error: Unable to connect to HPLIP I/O (hpiod).
> > > > > > >
> > > > > > > hp-check
> > > > > > >
> > > > > > > HP Linux Imaging and Printing System (ver. 1.7.3)
> > > > > > > Dependency/Version Check Utility ver. 5.3
> > > > > > >
> > > > > > > Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
> > > > > > > This software comes with ABSOLUTELY NO WARRANTY.
> > > > > > > This is free software, and you are welcome to distribute it
> > > > > > > under certain conditions. See COPYING file for more details.
> > > > > > >
> > > > > > >
> > > > > > > ---------------
> > > > > > > | SYSTEM INFO |
> > > > > > > ---------------
> > > > > > >
> > > > > > > Basic system information:
> > > > > > > Linux khalid-laptop 2.6.20-14-generic #2 SMP Mon Apr 2
> > > > > > > 20:37:49 UTC 2007 i686 GNU/Linux
> > > > > > >
> > > > > > > Detected distro (/etc/issue):
> > > > > > > ubuntu 7.04
> > > > > > >
> > > > > > > Detected distro (lsb_release):
> > > > > > > Ubuntu 7.04 (feisty)
> > > > > > >
> > > > > > > Currently installed HPLIP version...
> > > > > > > HPLIP 1.7.3 currently installed in '/usr/lib/hplip'.
> > > > > > >
> > > > > > > Current contents of '/etc/hp/hplip.conf' file:
> > > > > > > # hplip.conf
> > > > > > >
> > > > > > > [hpiod]
> > > > > > > # port=0 (dynamic IP port)
> > > > > > > port=2208
> > > > > > > [hpssd]
> > > > > > > # port=0 (dynamic IP port)
> > > > > > > port=2207
> > > > > > >
> > > > > > > [hplip]
> > > > > > > version=1.7.3
> > > > > > > jdprobe=0
> > > > > > >
> > > > > > > [dirs]
> > > > > > > home=/usr/lib/hplip
> > > > > > > run=/var/run/hplip
> > > > > > > ppd=/usr/share/ppd
> > > > > > > doc=/usr/share/doc/hplip-doc/HTML
> > > > > > >
> > > > > > > # Following values are determined at configure time and
> > > > > > > cannot be changed.
> > > > > > > [configure]
> > > > > > > network-build=1
> > > > > > > pp-build=1
> > > > > > > gui-build=1
> > > > > > > scanner-build=1
> > > > > > > fax-build=1
> > > > > > > cups11-build=0
> > > > > > >
> > > > > > >
> > > > > > > HPLIP running?
> > > > > > > No, HPLIP is not running (OK).
> > > > > > >
> > > > > > > HPOJ running?
> > > > > > > No, HPOJ is not running (OK).
> > > > > > >
> > > > > > > Checking Python version...
> > > > > > > OK, version 2.5.1 installed
> > > > > > >
> > > > > > > Checking PyQt version...
> > > > > > > OK, version 3.17 installed.
> > > > > > >
> > > > > > > Checking SIP version...
> > > > > > > OK, Version 4.5 installed
> > > > > > >
> > > > > > > ----------------
> > > > > > > | DEPENDENCIES |
> > > > > > > ----------------
> > > > > > >
> > > > > > >
> > > > > > > Checking for dependency libcrypto - OpenSSL cryptographic
> > > > > > > library...
> > > > > > > OK, found.
> > > > > > >
> > > > > > > Checking for dependency gcc - GNU Project C and C++
> > > > > > > Compiler...
> > > > > > > OK, found.
> > > > > > >
> > > > > > > Checking for dependency SANE - Scanning library...
> > > > > > > OK, found.
> > > > > > >
> > > > > > > Checking for dependency GhostScript - PostScript and PDF
> > > > > > > language interpreter and previewer...
> > > > > > > OK, found.
> > > > > > >
> > > > > > > Checking for dependency libjpeg - JPEG library...
> > > > > > > OK, found.
> > > > > > >
> > > > > > > Checking for dependency libpthread - POSIX threads
> > > > > > > library...
> > > > > > > OK, found.
> > > > > > >
> > > > > > > Checking for dependency make - GNU make utility to maintain
> > > > > > > groups of programs...
> > > > > > > OK, found.
> > > > > > >
> > > > > > > Checking for dependency python-devel - Python development
> > > > > > > files...
> > > > > > > OK, found.
> > > > > > >
> > > > > > > Checking for dependency Reportlab - PDF library for
> > > > > > > Python...
> > > > > > > OK, found.
> > > > > > >
> > > > > > > Checking for dependency PyQt - Qt interface for Python...
> > > > > > > OK, found.
> > > > > > >
> > > > > > > Checking for dependency cups-devel- Common Unix Printing
> > > > > > > System development files...
> > > > > > > OK, found.
> > > > > > >
> > > > > > > Checking for dependency ppdev - Parallel port support kernel
> > > > > > > module....
> > > > > > > OK, found.
> > > > > > >
> > > > > > > Checking for dependency libusb - USB library...
> > > > > > > OK, found.
> > > > > > >
> > > > > > > Checking for dependency scanimage - Shell scanning
> > > > > > > program...
> > > > > > > OK, found.
> > > > > > >
> > > > > > > Checking for dependency libnetsnmp-devel - SNMP networking
> > > > > > > library development files...
> > > > > > > OK, found.
> > > > > > >
> > > > > > > Checking for dependency Python 2.2 or greater - Python
> > > > > > > programming language...
> > > > > > > OK, found.
> > > > > > >
> > > > > > > Checking for dependency LSB - Linux Standard Base support...
> > > > > > > OK, found.
> > > > > > >
> > > > > > > Checking for dependency xsane - Graphical scanner frontend
> > > > > > > for SANE...
> > > > > > > OK, found.
> > > > > > >
> > > > > > > Checking for dependency cups - Common Unix Printing
> > > > > > > System...
> > > > > > > OK, found.
> > > > > > >
> > > > > > > Checking for dependency Python 2.3 or greater - Required for
> > > > > > > fax functionality...
> > > > > > > OK, found.
> > > > > > >
> > > > > > >
> > > > > > > ----------------------
> > > > > > > | INSTALLED PRINTERS |
> > > > > > > ----------------------
> > > > > > >
> > > > > > >
> > > > > > > DeskJet-F300
> > > > > > > ------------
> > > > > > > Device URI:
> > > > > > > usb://HP/Deskjet%20F300%20series?serial=CN65CF80SJ04KH
> > > > > > > Installed in HPLIP? No
> > > > > > > PPD: /etc/cups/ppd/DeskJet-F300.ppd
> > > > > > > PPD Description: HP DeskJet F300 Foomatic/hpijs
> > > > > > > (recommended)
> > > > > > > Printer status: printer DeskJet-F300 is idle. enabled since
> > > > > > > Wed 04 Apr 2007 08:14:33 PM PDT
> > > > > > >
> > > > > > > error: Printer is not HPLIP installed. Printers must use the
> > > > > > > hp: or hpfax: CUPS backend to function in HPLIP. (You can still
print to
> > > > > > > this printer using another backend and HPIJS.)
> > > > > > >
> > > > > > >
> > > > > > > ----------------------
> > > > > > > | SANE CONFIGURATION |
> > > > > > > ----------------------
> > > > > > >
> > > > > > > 'hpaio' in '/etc/sane.d/dll.conf'...
> > > > > > > OK, found. SANE backend 'hpaio' is properly set up.
> > > > > > >
> > > > > > > Checking output of 'scanimage -L'...
> > > > > > >
> > > > > > > No scanners were identified. If you were expecting something
> > > > > > > different,
> > > > > > > check that the scanner is plugged in, turned on and detected
> > > > > > > by the
> > > > > > > sane-find-scanner tool (if appropriate). Please read the
> > > > > > > documentation
> > > > > > > which came with this software (README, FAQ, manpages).
> > > > > > >
> > > > > > >
> > > > > > > ---------------------
> > > > > > > | PYTHON EXTENSIONS |
> > > > > > > ---------------------
> > > > > > >
> > > > > > > Checking 'cupsext' CUPS extension...
> > > > > > > OK, found.
> > > > > > >
> > > > > > > Checking 'pcardext' Photocard extension...
> > > > > > > OK, found.
> > > > > > >
> > > > > > >
> > > > > > > 1 errors were detected.
> > > > > > > Please refer to the installation instructions at:
> > > > > > > http://hplip.sourceforge.net/install/index.html
> > > > > > >
> > > > > > > sane-find-scanner utility
> > > > > > >
> > > > > > > # sane-find-scanner will now attempt to detect your scanner.
> > > > > > > If the
> > > > > > > # result is different from what you expected, first make
> > > > > > > sure your
> > > > > > > # scanner is powered up and properly connected to your
> > > > > > > computer.
> > > > > > >
> > > > > > > # No SCSI scanners found. If you expected something
> > > > > > > different, make sure that
> > > > > > > # you have loaded a kernel SCSI driver for your SCSI
> > > > > > > adapter.
> > > > > > >
> > > > > > > found USB scanner (vendor=0x03f0 [HP], product=0x5511
> > > > > > > [Deskjet F300 series]) at libusb:001:002
> > > > > > > # Your USB scanner was (probably) detected. It may or may
> > > > > > > not be supported by
> > > > > > > # SANE. Try scanimage -L and read the backend's manpage.
> > > > > > >
> > > > > > > # Not checking for parallel port scanners.
> > > > > > >
> > > > > > > # Most Scanners connected to the parallel port or other
> > > > > > > proprietary ports
> > > > > > > # can't be detected by this program.
> > > > > > >
> > > > > > > # You may want to run this program as root to find all
> > > > > > > devices. Once you
> > > > > > > # found the scanner devices, be sure to adjust access
> > > > > > > permissions as
> > > > > > > # necessary.
> > > > > > >
> > > > > > > [EMAIL PROTECTED]:~$ scanimage -L
> > > > > > >
> > > > > > > No scanners were identified. If you were expecting something
> > > > > > > different,
> > > > > > > check that the scanner is plugged in, turned on and detected
> > > > > > > by the
> > > > > > > sane-find-scanner tool (if appropriate). Please read the
> > > > > > > documentation
> > > > > > > which came with this software (README, FAQ, manpages).
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Thanks for the help!
> > > > > > >
> > > > > > > --
> > > > > > > theonlykman
> > > > > > >
> > > > > > >
-------------------------------------------------------------------------
> > > > > > > Take Surveys. Earn Cash. Influence the Future of IT
> > > > > > > Join SourceForge.net's Techsay panel and you'll get the
> > > > > > > chance to share your
> > > > > > > opinions on IT & business topics through brief surveys-and
> > > > > > > earn cash
> > > > > > >
> > > > > > >
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> > > > > > > _______________________________________________
> > > > > > > HPLIP-Help mailing list
> > > > > > > HPLIP-Help@lists.sourceforge.net
> > > > > > > https://lists.sourceforge.net/lists/listinfo/hplip-help
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > I don't care, I'm still free. You can't take the sky from me.
> > > > > > - "Firefly"
> > > > > > -
> > > > > > Ubuntu User: #11105
> > > > > > Ubuntu Linux http://ubuntulinux.org
> > > > >
> > > > >
> > > >
> > > >
> > > > --
> > > > I don't care, I'm still free. You can't take the sky from me. -
> > > > "Firefly"
> > > > -
> > > > Ubuntu User: #11105
> > > > Ubuntu Linux http://ubuntulinux.org
> > > >
> > >
> > >
> > >
> > > --
> > > Khalid Luqman
> >
> >
> >
> >
> > --
> > I don't care, I'm still free. You can't take the sky from me. -
> > "Firefly"
> > -
> > Ubuntu User: #11105
> > Ubuntu Linux http://ubuntulinux.org
> >
>
>
>
> --
> Khalid Luqman
--
I don't care, I'm still free. You can't take the sky from me. - "Firefly"
-
Ubuntu User: #11105
Ubuntu Linux http://ubuntulinux.org
--
Khalid Luqman
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help
