Thanks, here are the scripts, but as I mentioned I just copied them from the documentation.
#!/bin/bash # This script should contain the command(s) nessesary to switch on the # nVidia card. # As an example i've included the script for the Dell Vostro 3500, provided by pauloxnet.. # Please note that the acpi_call module is need for these operations: # # http://linux-hybrid-graphics.blogspot.com/2010/07/using-acpicall-module-to-switch-onoff.html modprobe acpi_call if ! lsmod | grep -q acpi_call; then echo "Error: acpi_call module not loaded" exit fi acpi_call () { echo "$*" > /proc/acpi/call result=$(cat /proc/acpi/call) case "$result" in Error*) echo "Enabling nVidia Card failed ($result)." ;; *) echo "Enabling nVidia Card Succeded." ;; esac } echo _PS0 $(acpi_call "_SB.PCI0.POP1.PEGP._OFF") modprobe nvidia-current #!/bin/bash # This script should contain the command(s) nessesary to switch off the # nVidia card. # As an example i've included the script for the Dell Vostro 3500, provided by pauloxnet.. # Please note that the acpi_call module is need for these operations: # # http://linux-hybrid-graphics.blogspot.com/2010/07/using-acpicall-module-to-switch-onoff.html rmmod nvidia if lsmod | grep -q nvidia; then echo "Error: could not unload nvidia module, leaving card turned on" exit fi modprobe acpi_call if ! lsmod | grep -q acpi_call; then echo "Error: acpi_call module not loaded" exit fi acpi_call () { echo "$*" > /proc/acpi/call result=$(cat /proc/acpi/call) case "$result" in Error*) echo "Disabling nVidia Card failed ($result)." ;; *) echo "Disabling nVidia Card Succeded." ;; esac } echo _PS0 $(acpi_call "_SB.PCI0.POP1.PEGP._OFF") 2011/5/27 MASSUCHETTI Jonathan <iletaitunf...@hotmail.fr> > Hi, > > Dell Vostro 3X00 have a specific power management relative to the nVidia > card. Can we see you script to enable & disable card please ? > > 2011/5/27 Oier Mees <oier.m...@gmail.com> > >> Hi, >> I installed bumblebee on Ubuntu 11.04 with nvidia 310m (Vostro 3500) and >> the optirun64 glxgears works succesfully. Since there is a example >> documentation of vostro 3500 provided, I copied and renamed this examples to >> /usr/local/bin/bumblebee-enablecard and disablecard. >> While I run optirun64 glxgears the nvidia module is loaded (checked with >> lsmod) and when I exit glxgears, unloaded. But I get keeping the following >> message while I run optirun64 or I try enabling and disabling the card: >> $ optirun64 glxgears >> * Starting Bumblebee X server >> bumblebee _PS0 Enabling nVidia Card >> failed (Error: AE_BAD_PARAMETER). >> [ >> OK ] >> 2731 frames in 5.0 seconds = 546.133 FPS >> 2851 frames in 5.0 seconds = 570.166 FPS >> 2662 frames in 5.0 seconds = 532.364 FPS >> [VGL] ERROR: in readback-- >> [VGL] 362: Window has been deleted by window manager >> * Stopping Bumblebee X server >> bumblebee * >> . >> _PS0 Disabling nVidia Card failed (Error: AE_BAD_PARAMETER). >> >> >> If modprobe and rmmod work, does this mean that turning the card on and >> off also works? What does the error message mean? >> Regards, >> Oier >> >> >> _______________________________________________ >> Mailing list: https://launchpad.net/~hybrid-graphics-linux >> Post to : hybrid-graphics-linux@lists.launchpad.net >> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux >> More help : https://help.launchpad.net/ListHelp >> >> >
_______________________________________________ Mailing list: https://launchpad.net/~hybrid-graphics-linux Post to : hybrid-graphics-linux@lists.launchpad.net Unsubscribe : https://launchpad.net/~hybrid-graphics-linux More help : https://help.launchpad.net/ListHelp
