If I put the backslash I get the following error: _PS0 Disabling nVidia Card failed (Error: AE_NOT_FOUND).
What does that mean? 2011/5/28 MASSUCHETTI Jonathan <iletaitunf...@hotmail.fr> > Don't you forgot the backslash ? > > Its " *\*_SB.PCI0.POP1.PEGP._OFF " > > > 2011/5/28 Oier Mees <oier.m...@gmail.com> > >> Thanks, here are the scripts, but as I mentioned I just copied them from >> the documentation. >> >> #!/bin/bash >> # This script should contain the command(s) nessesary to switch on the >> # nVidia card. >> # As an example i've included the script for the Dell Vostro 3500, >> provided by pauloxnet.. >> # Please note that the acpi_call module is need for these operations: >> # >> # >> http://linux-hybrid-graphics.blogspot.com/2010/07/using-acpicall-module-to-switch-onoff.html >> >> modprobe acpi_call >> >> if ! lsmod | grep -q acpi_call; then >> echo "Error: acpi_call module not loaded" >> exit >> fi >> >> acpi_call () { >> echo "$*" > /proc/acpi/call >> result=$(cat /proc/acpi/call) >> case "$result" in >> Error*) >> echo "Enabling nVidia Card failed ($result)." >> ;; >> *) >> echo "Enabling nVidia Card Succeded." >> ;; >> esac >> } >> >> echo _PS0 $(acpi_call "_SB.PCI0.POP1.PEGP._OFF") >> modprobe nvidia-current >> >> >> >> >> >> #!/bin/bash >> # This script should contain the command(s) nessesary to switch off the >> # nVidia card. >> # As an example i've included the script for the Dell Vostro 3500, >> provided by pauloxnet.. >> # Please note that the acpi_call module is need for these operations: >> # >> # >> http://linux-hybrid-graphics.blogspot.com/2010/07/using-acpicall-module-to-switch-onoff.html >> >> rmmod nvidia >> if lsmod | grep -q nvidia; then >> echo "Error: could not unload nvidia module, leaving card turned on" >> exit >> fi >> modprobe acpi_call >> >> if ! lsmod | grep -q acpi_call; then >> echo "Error: acpi_call module not loaded" >> exit >> fi >> >> acpi_call () { >> echo "$*" > /proc/acpi/call >> result=$(cat /proc/acpi/call) >> case "$result" in >> Error*) >> echo "Disabling nVidia Card failed ($result)." >> ;; >> *) >> echo "Disabling nVidia Card >> Succeded." >> >> ;; >> esac >> } >> >> echo _PS0 $(acpi_call "_SB.PCI0.POP1.PEGP._OFF") >> >> >> >> 2011/5/27 MASSUCHETTI Jonathan <iletaitunf...@hotmail.fr> >> >>> Hi, >>> >>> Dell Vostro 3X00 have a specific power management relative to the nVidia >>> card. Can we see you script to enable & disable card please ? >>> >>> 2011/5/27 Oier Mees <oier.m...@gmail.com> >>> >>>> Hi, >>>> I installed bumblebee on Ubuntu 11.04 with nvidia 310m (Vostro 3500) and >>>> the optirun64 glxgears works succesfully. Since there is a example >>>> documentation of vostro 3500 provided, I copied and renamed this examples >>>> to >>>> /usr/local/bin/bumblebee-enablecard and disablecard. >>>> While I run optirun64 glxgears the nvidia module is loaded (checked with >>>> lsmod) and when I exit glxgears, unloaded. But I get keeping the following >>>> message while I run optirun64 or I try enabling and disabling the card: >>>> $ optirun64 glxgears >>>> * Starting Bumblebee X server >>>> bumblebee _PS0 Enabling nVidia Card >>>> failed (Error: AE_BAD_PARAMETER). >>>> >>>> [ OK ] >>>> 2731 frames in 5.0 seconds = 546.133 FPS >>>> 2851 frames in 5.0 seconds = 570.166 FPS >>>> 2662 frames in 5.0 seconds = 532.364 FPS >>>> [VGL] ERROR: in readback-- >>>> [VGL] 362: Window has been deleted by window manager >>>> * Stopping Bumblebee X server >>>> bumblebee * >>>> . >>>> _PS0 Disabling nVidia Card failed (Error: AE_BAD_PARAMETER). >>>> >>>> >>>> If modprobe and rmmod work, does this mean that turning the card on and >>>> off also works? What does the error message mean? >>>> Regards, >>>> Oier >>>> >>>> >>>> _______________________________________________ >>>> Mailing list: https://launchpad.net/~hybrid-graphics-linux >>>> Post to : hybrid-graphics-linux@lists.launchpad.net >>>> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux >>>> More help : https://help.launchpad.net/ListHelp >>>> >>>> >>> >> >
_______________________________________________ Mailing list: https://launchpad.net/~hybrid-graphics-linux Post to : hybrid-graphics-linux@lists.launchpad.net Unsubscribe : https://launchpad.net/~hybrid-graphics-linux More help : https://help.launchpad.net/ListHelp
