Hi, I have the same problem. When I was run the instalation scrip I recieved this error message:
Auto-detecting hardware UNDEFINED _PS0 Enabling nVidia Card failed (Error: AE_BAD_PARAMETER). _PS0 Disabling nVidia Card failed (Error: AE_BAD_PARAMETER). someone would help us? Thanks, Thiago. 2011/5/28 Oier Mees <oier.m...@gmail.com> > If I put the backslash I get the following error: > _PS0 Disabling nVidia Card failed (Error: AE_NOT_FOUND). > > What does that mean? > > 2011/5/28 MASSUCHETTI Jonathan <iletaitunf...@hotmail.fr> > >> Don't you forgot the backslash ? >> >> Its " *\*_SB.PCI0.POP1.PEGP._OFF " >> >> >> 2011/5/28 Oier Mees <oier.m...@gmail.com> >> >>> Thanks, here are the scripts, but as I mentioned I just copied them from >>> the documentation. >>> >>> #!/bin/bash >>> # This script should contain the command(s) nessesary to switch on the >>> # nVidia card. >>> # As an example i've included the script for the Dell Vostro 3500, >>> provided by pauloxnet.. >>> # Please note that the acpi_call module is need for these operations: >>> # >>> # >>> http://linux-hybrid-graphics.blogspot.com/2010/07/using-acpicall-module-to-switch-onoff.html >>> >>> modprobe acpi_call >>> >>> if ! lsmod | grep -q acpi_call; then >>> echo "Error: acpi_call module not loaded" >>> exit >>> fi >>> >>> acpi_call () { >>> echo "$*" > /proc/acpi/call >>> result=$(cat /proc/acpi/call) >>> case "$result" in >>> Error*) >>> echo "Enabling nVidia Card failed ($result)." >>> ;; >>> *) >>> echo "Enabling nVidia Card Succeded." >>> ;; >>> esac >>> } >>> >>> echo _PS0 $(acpi_call "_SB.PCI0.POP1.PEGP._OFF") >>> modprobe nvidia-current >>> >>> >>> >>> >>> >>> #!/bin/bash >>> # This script should contain the command(s) nessesary to switch off the >>> # nVidia card. >>> # As an example i've included the script for the Dell Vostro 3500, >>> provided by pauloxnet.. >>> # Please note that the acpi_call module is need for these operations: >>> # >>> # >>> http://linux-hybrid-graphics.blogspot.com/2010/07/using-acpicall-module-to-switch-onoff.html >>> >>> rmmod nvidia >>> if lsmod | grep -q nvidia; then >>> echo "Error: could not unload nvidia module, leaving card turned on" >>> exit >>> fi >>> modprobe acpi_call >>> >>> if ! lsmod | grep -q acpi_call; then >>> echo "Error: acpi_call module not loaded" >>> exit >>> fi >>> >>> acpi_call () { >>> echo "$*" > /proc/acpi/call >>> result=$(cat /proc/acpi/call) >>> case "$result" in >>> Error*) >>> echo "Disabling nVidia Card failed ($result)." >>> ;; >>> *) >>> echo "Disabling nVidia Card >>> Succeded." >>> >>> ;; >>> >>> esac >>> } >>> >>> echo _PS0 $(acpi_call "_SB.PCI0.POP1.PEGP._OFF") >>> >>> >>> >>> 2011/5/27 MASSUCHETTI Jonathan <iletaitunf...@hotmail.fr> >>> >>>> Hi, >>>> >>>> Dell Vostro 3X00 have a specific power management relative to the nVidia >>>> card. Can we see you script to enable & disable card please ? >>>> >>>> 2011/5/27 Oier Mees <oier.m...@gmail.com> >>>> >>>>> Hi, >>>>> I installed bumblebee on Ubuntu 11.04 with nvidia 310m (Vostro 3500) >>>>> and the optirun64 glxgears works succesfully. Since there is a example >>>>> documentation of vostro 3500 provided, I copied and renamed this examples >>>>> to >>>>> /usr/local/bin/bumblebee-enablecard and disablecard. >>>>> While I run optirun64 glxgears the nvidia module is loaded (checked >>>>> with lsmod) and when I exit glxgears, unloaded. But I get keeping the >>>>> following message while I run optirun64 or I try enabling and disabling >>>>> the >>>>> card: >>>>> $ optirun64 glxgears >>>>> * Starting Bumblebee X server >>>>> bumblebee _PS0 Enabling nVidia Card >>>>> failed (Error: AE_BAD_PARAMETER). >>>>> >>>>> [ OK ] >>>>> 2731 frames in 5.0 seconds = 546.133 FPS >>>>> 2851 frames in 5.0 seconds = 570.166 FPS >>>>> 2662 frames in 5.0 seconds = 532.364 FPS >>>>> [VGL] ERROR: in readback-- >>>>> [VGL] 362: Window has been deleted by window manager >>>>> * Stopping Bumblebee X server >>>>> bumblebee * >>>>> . >>>>> _PS0 Disabling nVidia Card failed (Error: AE_BAD_PARAMETER). >>>>> >>>>> >>>>> If modprobe and rmmod work, does this mean that turning the card on and >>>>> off also works? What does the error message mean? >>>>> Regards, >>>>> Oier >>>>> >>>>> >>>>> _______________________________________________ >>>>> Mailing list: https://launchpad.net/~hybrid-graphics-linux >>>>> Post to : hybrid-graphics-linux@lists.launchpad.net >>>>> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux >>>>> More help : https://help.launchpad.net/ListHelp >>>>> >>>>> >>>> >>> >> > > _______________________________________________ > Mailing list: https://launchpad.net/~hybrid-graphics-linux > Post to : hybrid-graphics-linux@lists.launchpad.net > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux > More help : https://help.launchpad.net/ListHelp > >
_______________________________________________ Mailing list: https://launchpad.net/~hybrid-graphics-linux Post to : hybrid-graphics-linux@lists.launchpad.net Unsubscribe : https://launchpad.net/~hybrid-graphics-linux More help : https://help.launchpad.net/ListHelp
