Version 1.6.1 had some weird bug (sorry)... could you please try newest version???
Fra: "Marvin Budd" <marvb...@gmail.com> Til: hybrid-graphics-linux@lists.launchpad.net Sendt: tirsdag, 31. maj 2011 02:44:42 Emne: [Hybrid-graphics-linux] Fwd: switching cards on bumblebee, dell vostro 3500 After installing 1.6.1 I made the manual change in the Dell XPS enable/disable scripts and that seemed to work. However, I have not been able to get the nvidia-current.ko to load. There is a message in there somewhere about nvidia_current not being found, so I think there is a misspelling of hyphen and underline. I tried renaming the .ko file but that did not help. Then, just now, I tried to reboot, and I could not. So getting to recovery mode and uninstalling bumble made it better again. I'm not sure where to go from here. But at least I can use my machine again. Marvin Budd On Mon, May 30, 2011 at 5:12 PM, Oier Mees < oier.m...@gmail.com > wrote: I am not sure, even with the fix I get: _PS0 Disabling nVidia Card failed (Error: AE_BAD_PARAMETER). 2011/5/30 Joaquín Ignacio Aramendía < samsa...@gmail.com > That was an error in the enable/disable script. The acpi_call method was misstyped. Was reported and i think Martin already fised it. -- Joaquín Ignacio Aramendía < samsa...@gmail.com > El lun, 30-05-2011 a las 15:22 -0300, Thiago Santos escribió: > Hi, > > I have the same problem. When I was run the instalation scrip I > recieved this error message: > > Auto-detecting hardware > UNDEFINED > > _PS0 Enabling nVidia Card failed (Error: AE_BAD_PARAMETER). > _PS0 Disabling nVidia Card failed (Error: AE_BAD_PARAMETER). > > someone would help us? > > Thanks, Thiago. > > > 2011/5/28 Oier Mees < oier.m...@gmail.com > > If I put the backslash I get the following error: > _PS0 Disabling nVidia Card failed (Error: AE_NOT_FOUND). > > What does that mean? > > 2011/5/28 MASSUCHETTI Jonathan < iletaitunf...@hotmail.fr > > Don't you forgot the backslash ? > > Its " \_SB.PCI0.POP1.PEGP._OFF " > > > > > 2011/5/28 Oier Mees < oier.m...@gmail.com > > Thanks, here are the scripts, but as I > mentioned I just copied them from the > documentation. > > #!/bin/bash > # This script should contain the command(s) > nessesary to switch on the > # nVidia card. > # As an example i've included the script for > the Dell Vostro 3500, provided by pauloxnet.. > # Please note that the acpi_call module is > need for these operations: > # > # > http://linux-hybrid-graphics.blogspot.com/2010/07/using-acpicall-module-to-switch-onoff.html > > > modprobe acpi_call > > if ! lsmod | grep -q acpi_call; then > echo "Error: acpi_call module not loaded" > exit > fi > > acpi_call () { > echo "$*" > /proc/acpi/call > result=$(cat /proc/acpi/call) > case "$result" in > Error*) > echo "Enabling nVidia Card failed > ($result)." > ;; > *) > echo "Enabling nVidia Card Succeded." > ;; > esac > } > > echo _PS0 $(acpi_call > "_SB.PCI0.POP1.PEGP._OFF") > modprobe nvidia-current > > > > > > #!/bin/bash > # This script should contain the command(s) > nessesary to switch off the > # nVidia card. > # As an example i've included the script for > the Dell Vostro 3500, provided by pauloxnet.. > # Please note that the acpi_call module is > need for these operations: > # > # > http://linux-hybrid-graphics.blogspot.com/2010/07/using-acpicall-module-to-switch-onoff.html > > > rmmod nvidia > if lsmod | grep -q nvidia; then > echo "Error: could not unload nvidia module, > leaving card turned on" > exit > fi > modprobe acpi_call > > if ! lsmod | grep -q acpi_call; then > echo "Error: acpi_call module not loaded" > exit > fi > > acpi_call () { > echo "$*" > /proc/acpi/call > result=$(cat /proc/acpi/call) > case "$result" in > Error*) > echo "Disabling nVidia Card failed > ($result)." > ;; > *) > echo "Disabling nVidia Card > Succeded." > ;; > esac > } > > echo _PS0 $(acpi_call > "_SB.PCI0.POP1.PEGP._OFF") > > > > > 2011/5/27 MASSUCHETTI Jonathan > < iletaitunf...@hotmail.fr > > Hi, > > Dell Vostro 3X00 have a specific power > management relative to the nVidia > card. Can we see you script to enable > & disable card please ? > > > 2011/5/27 Oier Mees > < oier.m...@gmail.com > > > > > Hi, > I installed bumblebee on > Ubuntu 11.04 with nvidia 310m > (Vostro 3500) and the > optirun64 glxgears works > succesfully. Since there is a > example documentation of > vostro 3500 provided, I copied > and renamed this examples > to /usr/local/bin/bumblebee-enablecard and disablecard. > While I run optirun64 glxgears > the nvidia module is loaded > (checked with lsmod) and when > I exit glxgears, unloaded. But > I get keeping the following > message while I run optirun64 > or I try enabling and > disabling the card: > $ optirun64 glxgears > * Starting Bumblebee X server > bumblebee > _PS0 Enabling nVidia Card > failed (Error: > AE_BAD_PARAMETER). > > [ OK ] > 2731 frames in 5.0 seconds = > 546.133 FPS > 2851 frames in 5.0 seconds = > 570.166 FPS > 2662 frames in 5.0 seconds = > 532.364 FPS > [VGL] ERROR: in readback-- > [VGL] 362: Window has been > deleted by window manager > * Stopping Bumblebee X server > bumblebee > * . > _PS0 Disabling nVidia Card > failed (Error: > AE_BAD_PARAMETER). > > > If modprobe and rmmod work, > does this mean that turning > the card on and off also > works? What does the error > message mean? > Regards, > Oier > > > > > > _______________________________________________ > Mailing list: > https://launchpad.net/~hybrid-graphics-linux > Post to : > hybrid-graphics-linux@lists.launchpad.net > Unsubscribe : > https://launchpad.net/~hybrid-graphics-linux > More help : > https://help.launchpad.net/ListHelp > > > > > > > > > _______________________________________________ > Mailing list: https://launchpad.net/~hybrid-graphics-linux > Post to : hybrid-graphics-linux@lists.launchpad.net > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux > More help : https://help.launchpad.net/ListHelp > > > _______________________________________________ > Mailing list: https://launchpad.net/~hybrid-graphics-linux > Post to : hybrid-graphics-linux@lists.launchpad.net > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux > More help : https://help.launchpad.net/ListHelp _______________________________________________ Mailing list: https://launchpad.net/~hybrid-graphics-linux Post to : hybrid-graphics-linux@lists.launchpad.net Unsubscribe : https://launchpad.net/~hybrid-graphics-linux More help : https://help.launchpad.net/ListHelp _______________________________________________ Mailing list: https://launchpad.net/~hybrid-graphics-linux Post to : hybrid-graphics-linux@lists.launchpad.net Unsubscribe : https://launchpad.net/~hybrid-graphics-linux More help : https://help.launchpad.net/ListHelp _______________________________________________ Mailing list: https://launchpad.net/~hybrid-graphics-linux Post to : hybrid-graphics-linux@lists.launchpad.net Unsubscribe : https://launchpad.net/~hybrid-graphics-linux More help : https://help.launchpad.net/ListHelp
_______________________________________________ Mailing list: https://launchpad.net/~hybrid-graphics-linux Post to : hybrid-graphics-linux@lists.launchpad.net Unsubscribe : https://launchpad.net/~hybrid-graphics-linux More help : https://help.launchpad.net/ListHelp
