Roger, It would appear that one of your VTAM systems has NetID P390 and the other has NetID ADCD. In order to connect two VTAMs with different NetIDs over a channel-to-channel connection, you need to use APPN.
Note: I was going to say "Low Entry Networking" (LEN) first - as well as APPN - but then I remembered that LEN is not possible over a channel - although you could use it over, say, Ethernet if your systems both emulate 3172s, for example. I guess you have a "P390" and maybe a FLEX-ES running the ADCD package and I'm afraid I don't know these systems well enough to know what facilities they are clever enough to emulate. It's rather amazing that you have managed to set up so much of a set of SNI definitions. I'm afraid the part you are missing is vital - and somewhat complicated if you are not steeped in it - namely, one or two NCPs. I expect you found a redbook for your samples - but didn't read all of it - very dangerous :-) Incidentally, with these subarea SNA definitions, you should first have set up a CDRM/SSCP to CDRM/SSCP session, in other words, P390.P390SSCP needs to be in session with ADCD.ADCDSSCP first. Without this, there is not a snowball in - am I allowed such a word in the newsgroup?* - anyhow you know what it is - chance of P390.A06JES2 getting in session with ADCD.A08JES2. * Once, in an earlier manifestation of the newsgroup function - I used a word which refers to drawing in air through pursed lips together with "grandmother", "teach" and "eggs". The moderator felt that the expression needed to be rephrased in order to avoid offence! Since you have just the two VTAM systems and all you want to run is NJE, it should be fairly easy. If you need help, let me know. You should know there is a specifically VTAM newsgroup to which you can subscribe via this URL: http://www-1.ibm.com/support/docview.wss?rs=2192&context=SSRRLB&dc=D700&uid=swg27005100&loc=en_US&cs=utf-8&lang=en It will normally get at least very willing VTAM development help. Chris Mason ----- Original Message ----- From: "Roger Davis" <[EMAIL PROTECTED]> Newsgroups: bit.listserv.ibm-main To: <[email protected]> Sent: Wednesday, 11 January, 2006 4:47 PM Subject: z/OS 1.6 JES2 NJE link > Help! Please! I have a z/OS 1.4 and a z/OS 1.6 system connected by a CTCA > and I am trying to activate a JES2 NJE connection between them. When I > issue a $S N,LNE1,A=A06NJE from the z/OS 1.6 system I get the following > VTAM sense codes in the IST663I message - > z/OS 1.6 - 087D0001; z/OS 1.4 - 087C0000 > Prior to that command I had issued $S LGN1 and $S LNE1 on both systems. > > I must have something in the definitions that is wrong but I can't figure > out what. The NJE definitions are as follows - > z/OS 1.6 system > JES2PARM - > > LINE(1) UNIT=SNA > > NJEDEF DELAY=120, > HDRBUF=(LIMIT=100, > WARN=80), > JRNUM=2, > JTNUM=2, > LINENUM=5, > MAILMSG=NO, > MAXHOP=0, > NODENUM=50, > OWNNODE=1, > PATH=1, > RESTMAX=8000000, > RESTNODE=150, > RESTTOL=300, > SRNUM=2, > STNUM=2, > TIMETOL=30 > > NODE(2) NAME=ZOS14, /* z/OS 1.4 system */ > RECEIVE=BOTH, > TRANSMIT=BOTH, > PATHMGR=NO, > AUTH=(DEVICE=YES,JOB=YES,NET=YES,SYSTEM=YES) > > NODE(1) NAME=ZOS16, /* z/OS 1.6 system */ > RECEIVE=BOTH, > TRANSMIT=BOTH, > PATHMGR=NO, > AUTH=(DEVICE=YES,JOB=YES,NET=YES,SYSTEM=YES) > > APPL(A06JES2) NODE=2 > > CONNECT NODEA=1,MEMBA=1, > NODEB=2,MEMBB=1, > REST=2 > VTAM - > local JES2 appl - > VBUILD TYPE=APPL > * > APZ6JES APPL ACBNAME=ADCDNJE,AUTH=(PASS,ACQ,VPACE),VPACING=10, X > MODETAB=ISTINCLM,DLOGMOD=JES2NJE > > Cross domain for z/OS 1.4 JES2 - > VBUILD TYPE=CDRSC > NETWORK NETID=P390 > A06JES2 CDRSC CDRM=P390SSCP > > Cross domain manager - > VBUILD TYPE=CDRM > ADCD NETWORK NETID=ADCD > ADCDSSCP CDRM CDRDYN=YES, ** AUTHORIZE DYNAMIC CDRSC DEF. ** X > CDRSC=OPT, ** AUTHORIZE DYNAMIC CDRSC DEF. ** X > ELEMENT=1, ** HOST ELEMENT ADDRESS ** X > ISTATUS=ACTIVE, ** CDRM INITIAL ACTIVATION STATUS ** X > RECOVERY=YES, ** CDRM AUTOMATIC RECOVERY ** X > SUBAREA=8, ** NETWORK UNIQUE SUBAREA ADDRESS ** X > VPACING=63 ** CDRM REQS BEFORE PACING RESP ** > * > P390 NETWORK NETID=P390 > P390SSCP CDRM CDRDYN=YES, X > CDRSC=OPT, X > SUBAREA=6, ** NETWORK UNIQUE SUBAREA ADDRESS ** X > ISTATUS=ACTIVE > GWPATH ADJNET=P390, X > ADJNETEL=1, ** ADJACENT NETWORK ELEMENT **X > ADJNETSA=6, ** ADJACENT NETWORK SUBAREA **X > ELEMENT=1, ** ELEMENT ADDRESS **X > SUBAREA=6 ** SUBAREA ADDRESS ** > > z/OS 1.4 system - > JES2PARM - > > LINE(1) UNIT=SNA > > NJEDEF DELAY=120, > HDRBUF=(LIMIT=100, > WARN=80), > JRNUM=2, > JTNUM=2, > LINENUM=5, > MAILMSG=NO, > MAXHOP=0, > NODENUM=50, > OWNNODE=1, > PATH=1, > RESTMAX=8000000, > RESTNODE=150, > RESTTOL=300, > SRNUM=2, > STNUM=2, > TIMETOL=30 > > NODE(1) NAME=ZOS14, /* z/OS 1.4 system */ > RECEIVE=BOTH, > TRANSMIT=BOTH, > AUTH=(DEVICE=YES,JOB=YES,NET=YES,SYSTEM=YES) > > NODE(2) NAME=ZOS16, /* z/OS 1.6 system */ > RECEIVE=BOTH, > TRANSMIT=BOTH, > AUTH=(DEVICE=YES,JOB=YES,NET=YES,SYSTEM=YES) > > LOGON(2) APPLID=A06JES2 > > APPL(A08JES2) NODE=2 > > CONNECT NODEA=1,MEMBA=1, > NODEB=2,MEMBB=1, > REST=2 > > VTAM - > local JES2 appl - > VBUILD TYPE=APPL > * > A06JES2 APPL ACBNAME=P390NJE,AUTH=(PASS,ACQ,VPACE), * > VPACING=10,MODETAB=ISTINCLM,DLOGMOD=JES2NJE > > Cross domain for z/OS 1.6 JES2 - > VBUILD TYPE=CDRSC > NETWORK NETID=ADCD > A08JES2 CDRSC CDRM=ADCDSSCP > > Cross domain manager - > VBUILD TYPE=CDRM > P390 NETWORK NETID=P390 > P390SSCP CDRM CDRDYN=YES, ** AUTHORIZE DYNAMIC CDRSC DEF. ** X > CDRSC=OPT, ** AUTHORIZE DYNAMIC CDRSC DEF. ** X > ELEMENT=1, ** HOST ELEMENT ADDRESS ** X > ISTATUS=ACTIVE, ** CDRM INITIAL ACTIVATION STATUS ** X > RECOVERY=YES, ** CDRM AUTOMATIC RECOVERY ** X > SUBAREA=6, ** NETWORK UNIQUE SUBAREA ADDRESS ** X > VPACING=63 ** CDRM REQS BEFORE PACING RESP ** > * > ADCD NETWORK NETID=ADCD > ADCDSSCP CDRM CDRDYN=YES, X > CDRSC=OPT, X > SUBAREA=8, ** NETWORK UNIQUE SUBAREA ADDRESS ** X > ISTATUS=ACTIVE > GWPATH ADJNET=ADCD, X > ADJNETEL=1, ** ADJACENT NETWORK ELEMENT **X > ELEMENT=1, ** ELEMENT ADDRESS **X > SUBAREA=8 ** SUBAREA ADDRESS ** > > Any help will be greatly received. > > Best regards, > Roger Davis > Senior Systems Software Engineer > The Logic Group > Tel. +44 (0) 1252 776700 > DDI. +44 (0) 1252 644010 > Fax. +44 (0) 1252 776778 > www.the-logic-group.com ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
