I can tell there is quite a bit of confusion regarding the original question and the follow-on answers.
In HCD you need to create a separate OS configuration for each system. This is done through option 1, selection 1. One OS configuration can be named "TEST" and the other OS configuration can be named "PROD". The primary things you control through the OS configuration are the console addresses for NIP, and the EDT table(s). In your LOADxx member, you must specify the OS configuration to use in the IODF statement. I am going to assume you have everything already set up except for the OS configuration name. This name must match the name you used in HCD. The device access lists are usually created through the sections of HCD according to the LPAR access lists. You can check and customize the access lists for the OS configurations also. On Mon, 3 Jul 2006 15:48:40 +0100, Roy Hewitt <[EMAIL PROTECTED]> wrote: >Howard, > >A bit more info would be useful to be able to help > >1) You created IOCDS A3 from IODF05. Correct? > >2) Did you POR or Activate. > >3) If Activate, from which LPAR. > >4) What config is in use in each system. Issue a D IOS,CONFIG, paste >the reply > >5) What IPL parms issue D IPLINFO paste reply > >6) How many OS configs in existing IODF > >Regards > >Roy > > >Howard Rifkind wrote: >> I would love to spend some time reading the manual you suggested below but the 2105 is leaving on Thursday and I don't have time so I'm trying to dope this thing out. >> >> I loaded one IODF into slot A3 and it works for the test lpar...there aren't any connections between the test and prod lpars. >> >> Now if I get what what are you and and the fellow before are saying is just to point the test and prod lpars to the sys1.iodf05 iodf with the loadxx file and have another card image in the loadxx member with the lpar name. >> >> But don't you need one OS configuration for test on one for the prod lpar? >> >> Can you explain the flow? >> >> Thanks >> ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
