Greetings,
I searched the archives and didn't find anything that might help
explain what I'm observing.
I'm at the end of a console replacement project and had an issue
after a POR last night. None of the PC consoles came back online after
the POR/IPL. All had to be varied as consoles and then MSTCONS on the
master. The operators didn't mention how NIP went, but we've still got
the old 3270 console attached so I assume they got NIP messages there.
Anyway, after the IPL, all of the PC consoles came up with the OSA
information page. None were consoles. I can imagine the POR caused all
timeout information to be lost on the card, but these PCs were all
powered on at IPL. They are all defined in the OSA cards by IP and
LUname. All are defined in CONSOL00. Do I need to add VARY commands to
COMMND00 ??? I didn't catch that in the manuals. How are you managing
yours around IPL's ???
Thanks,
Dave K.
------------------------------------------------------------------------------
This e-mail transmission may contain information that is proprietary,
privileged and/or confidential and is intended exclusively for the person(s) to
whom it is addressed. Any use, copying, retention or disclosure by any person
other than the intended recipient or the intended recipient's designees is
strictly prohibited. If you are not the intended recipient or their designee,
please notify the sender immediately by return e-mail and delete all copies.
OppenheimerFunds may, at its sole discretion, monitor, review, retain and/or
disclose the content of all email communications.
==============================================================================
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
