Try $S. Thanks John Eatherly 972.254.5441 972.830.3627
-----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Eric Bielefeld Sent: Friday, January 09, 2009 3:08 PM To: [email protected] Subject: First z/OS 1.9 IPL Problem I just IPL'd z/OS 1.9 for the first time. I've been waiting for about 35 minutes after the IPL messages stopped coming out for JES2 to issue a message. If I do a D A,L, it shows JES2 as running, and a bunch of tasks starting, like they should be before JES2 is fully initialized. I can't really go back in the log to see if I have any messages. We are running on a z/800 with about 350 MIPS. Most of the time, our DB2 lpar is running flat out, and the other production Lpar is taking a few cycles. The 1.9 lpar is weighted at 10%, and allows only 1 of the 2 processors to be used. Could it just take that long for it to come up? According to RMF Mon 3, my lpar is taking 1.4% of CPU steadily. Early in the IPL, it had as much as 10% for a 100 second interval. Any thoughts? Eric -- Eric Bielefeld Systems Programmer Washington University St Louis, Missouri 314-935-3418 ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
