John. I tried $S. I didn't really think it would work, and it just said it was an invalid command. The first IPL, according to the Installing Your Order book, you have to reply with COLD and FORMAT. There aren't any messages outstanding.
Eric ---- "Eatherly wrote: > Try $S. > > Thanks > John Eatherly > 972.254.5441 > 972.830.3627 > > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf > Of Eric Bielefeld > Sent: Friday, January 09, 2009 3:08 PM > To: [email protected] > Subject: First z/OS 1.9 IPL Problem > > I just IPL'd z/OS 1.9 for the first time. I've been waiting for about 35 > minutes after the IPL messages stopped coming out for JES2 to issue a > message. If I do a D A,L, it shows JES2 as running, and a bunch of tasks > starting, like they should be before JES2 is fully initialized. I can't > really go back in the log to see if I have any messages. > > We are running on a z/800 with about 350 MIPS. Most of the time, our DB2 > lpar is running flat out, and the other production Lpar is taking a few > cycles. The 1.9 lpar is weighted at 10%, and allows only 1 of the 2 > processors to be used. Could it just take that long for it to come up? > > According to RMF Mon 3, my lpar is taking 1.4% of CPU steadily. Early in the > IPL, it had as much as 10% for a 100 second interval. > > Any thoughts? > > Eric > > -- > Eric Bielefeld > Systems Programmer > Washington University > St Louis, Missouri > 314-935-3418 ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
