IF you did get up to where JES is some functioning, you can revert to your old system and look at the log from there. If you've D R,R and as you say see nothing, I'd suspect OMVS or SMS didn't make it up due to some error. !.9 has some newer Displays for OMVS status. What level are you migrating from?
Dave Gibney Information Technology Services Washington State Univsersity -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Eric Bielefeld Sent: Friday, January 09, 2009 1:08 PM To: [email protected] Subject: First z/OS 1.9 IPL Problem I just IPL'd z/OS 1.9 for the first time. I've been waiting for about 35 minutes after the IPL messages stopped coming out for JES2 to issue a message. If I do a D A,L, it shows JES2 as running, and a bunch of tasks starting, like they should be before JES2 is fully initialized. I can't really go back in the log to see if I have any messages. We are running on a z/800 with about 350 MIPS. Most of the time, our DB2 lpar is running flat out, and the other production Lpar is taking a few cycles. The 1.9 lpar is weighted at 10%, and allows only 1 of the 2 processors to be used. Could it just take that long for it to come up? According to RMF Mon 3, my lpar is taking 1.4% of CPU steadily. Early in the IPL, it had as much as 10% for a 100 second interval. Any thoughts? Eric -- Eric Bielefeld Systems Programmer Washington University St Louis, Missouri 314-935-3418 ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
