----- Original Message -----
From: "Lizette Koehler" <[email protected]>
Newsgroups: bit.listserv.ibm-main
Sent: Monday, February 02, 2009 1:09 PM
Subject: Top Secret and EKM
Does anyone have EKM working and are using Top Secret for security?
I am having an issue with IOSAS and TSS. After an IPL the first job that
requests an encryption of a tape fails with IOS628E. This causes my tape
to have an I/O error and is dismounted. The job then immediately mounts a
new tape and viola it runs to a good EOJ. However, now I have a tape I
have to correct in CA1 and ISMF in order to use it again.
IBM sent me to CA and CA TSS is saying this is due to TSS coming up later
than IOSAS and the ACID is not quiet correct.
Lizette,
Since ACF2 and TSS come up so much later than RACF in the IPL process, I've
always found it helpful to define tasks like IOSAS as TRUSTED/PRIVILEGED in
ICHRIN03 for an ACF2 or TSS environment. This should get you past a lot of
the problems you get since TSS is not active.
Regards,
Tom Conley
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
