I stand corrected! Thank you for spotting my error. Entering IEC036I does indeed return the correct M&C page.
Peter -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Skeldum, William Sent: Friday, December 13, 2013 2:15 PM To: [email protected] Subject: Re: Lookat IEC036I is the entire message. If you want to use just IEC036 use a wildcard such as IEC036*. I don't use Lookat too much so I don't know if this is new behavior. Bill Skeldum -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Farley, Peter x23353 Sent: Friday, December 13, 2013 11:57 AM To: [email protected] Subject: Re: Lookat That Lookat web page may be there but it is not working very well. A search for message IEC036 generated this result: Message id "IEC036" was not found. Ensure the message id is complete/correct. It is possible this message id is documented in a book that is not yet LookAt-enabled. You might try a newer release. You may use LookAt feedback to inform IBM. Peter -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Gonzalo Cengotita Sent: Friday, December 13, 2013 8:52 AM To: [email protected] Subject: Re: Lookat I'm using http://www-03.ibm.com/systems/z/os/zos/bkserv/lookat/ and it's working at this moment 2013/12/13 Staller, Allan <[email protected]> > What URL are you using. > > I used www.ibm.com/systems/z/os/zos/bkserv/lookat/ > And got re-directed to > http://www-03.ibm.com/systems/z/os/zos/library/bkserv/index.html > > which *IS NOT* the LOOKAT I was expecting. > > ??? > > <snip> > I just tried it ! Lookat is back !! Now that's what I call good news. > </snip> -- This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
