Hello,
Thanks for reply. We have many IMS version like V8,V9,V10. But as
of now no plan to run IMS on this system.
But now issue is, how can I run RESTORE job. Because my system is not
working and not able to ipl and If I use another working system and try to
restore, it will end up removing entry from running system SYS1.LPALIB.
So, can you please suggest alternate way to remove this and make system
work. Also I am not able to understand John's suggestion.
On Sat, Jan 4, 2014 at 10:48 PM, Lizette Koehler <[email protected]>wrote:
> If you are running IMS V9 or above you do not need to have the USERMOD.
>
> I would restore/reject the usermod. Then update your system and IPL.
>
> John's suggestion may work so long as you do not have IMS running at this
> time. However
>
> RESTORE/REJECT the usermod if your IMS is at V9 or above.
>
> Also, check out this information here as well
> The ZAP to add DFSMRCL0 to IEAVTRML CSECT of IGC0001C used to be at offset
> 0000, but to make it work, we had to change the offset to 000C.
> ABEND806 RC4 occurred ...
>
> http://www-01.ibm.com/support/docview.wss?uid=swg21145559
>
>
> What version of IMS will you be running?????
>
>
> Lizette
>
>
> > -----Original Message-----
> > From: IBM Mainframe Discussion List [mailto:[email protected]] On
> > Behalf Of venkat kulkarni
> > Sent: Saturday, January 04, 2014 10:08 AM
> > To: [email protected]
> > Subject: Re: IPL Issue
> >
> > Hello,
> > Thanks for reply. As of now we don't have IMS on this new system,
> but I just
> > applied USERMOD, as I mentioned in my previous email.
> >
> > And then I tried ipling system and getting this error.
> >
> > CSV003I REQUESTED MODULE DFSMRCL0 NOT FOUND
> >
> > IEA303W abend 806 REASON 0000004 during initialization under RIM
> > IEAVNPA1 DFSMRCL0
> > Module NOT FOUND.
> >
> >
> > What changes do I need to make, So that system can find this module
> > DFSMRCL0 and ipl can continue.
> >
> > We have IMS running in other system and our volumes and user catalog are
> > shared.
> >
> >
> >
> >
> > On Sat, Jan 4, 2014 at 10:32 PM, Lizette Koehler
> > <[email protected]>wrote:
> >
> > > I am not sure what version of IMS you are running.
> > >
> > > But this link for IMS V11 details how to remove the DFSMRCL0 Module.
> > > It is not needed from IMS V9 and later versions.
> > >
> > >
> > > http://publib.boulder.ibm.com/infocenter/dzichelp/v2r2/index.jsp?topic
> > > =%2Fco m.ibm.ims11.doc.sag%2Fsystem_admin%2Fims_uninstall_dfsmrclo.htm
> > >
> > > After you have completely migrated to IMST Version 9 or later and
> > > there is no possibility of running an earlier release of IMS (both IMS
> > > control and IMS batch jobs), you can remove DFSMRCL0 from the host
> z/OSR
> > system.
> > >
> > > To remove DFSMRCL0 from the host z/OS system, perform the following
> steps:
> > >
> > > Remove the name DFSMRCL0 from the IEAVTRML CSECT of module
> > > IGC0001C in SYS1.LPALIB. Removing this name prevents the operating
> > > system from installing DFSMRCL0 as a Static Resource Cleanup routine at
> the
> > next IPL.
> > > Remove module DFSMRCL0 from SYS1.LPALIB or the MLPA library where
> > > DFSMRCL0 was bound.
> > > Restart with CLPA to enable these changes.
> > >
> > > Lizette
> > >
> > >
> > > > -----Original Message-----
> > > > From: IBM Mainframe Discussion List
> > > > [mailto:[email protected]] On Behalf Of venkat kulkarni
> > > > Sent: Saturday, January 04, 2014 9:24 AM
> > > > To: [email protected]
> > > > Subject: IPL Issue
> > > >
> > > > Hello,
> > > > I applied USERMOD in my new z/OS 2.1 system and then ipled
> > > system
> > > but
> > > > getting below issue.
> > > >
> > > > CSV003I REQUESTED MODULE DFSMRCL0 NOT FOUND
> > > >
> > > > IEA303W abend 806 REASON 0000004 during initialization under RIM
> > > > IEAVNPA1
> > > > DFSMRCL0 Module NOT FOUND.
> > > >
> > > >
> > > > and the usermod I applied was
> > > >
> > > > //SMPPTFIN DD DATA,DLM='%%'
> > > > ++USERMOD(USRMOD01) REWORK(2013035) .
> > > > ++VER(Z038) FMID(HBB7790) .
> > > > ++SRC(IEAVTRML) DISTLIB(AOSC5) .
> > > > IEAVTRML CSECT
> > > > DC CL8'ERBMFRES' RMF
> > > > DC F'0'
> > > > DC CL8'MVPTTRML' TCP/IP
> > > > DC F'0'
> > > > DC CL8'DFSMRCL0' IMS
> > > > DC F'0'
> > > > DC F'0'
> > > > DC F'0'
> > > > DC F'0'
> > > > END
> > > > %%
> > > > //
> > > >
> > > > As this is newly build system, so it doesn't have IMS yet.
> > > > I can follow below link to remove DFSMRCL0 from IGC0001C but not
> > > > sure,
> > > if its
> > > > correct way of recovering from this issue.
> > > >
> > > >
> > >
> > > http://publib.boulder.ibm.com/infocenter/dzichelp/v2r2/index.jsp?topic
> > > =%2Fco
> > > m.ibm
> > > > .ims11.doc.sag%2Fsystem_admin%2Fims_uninstall_dfsmrclo.htm
> > > >
> > > > Then I run AMASPZAP utility from the working system and pointed the
> > > > downsystem LPALIB volume to dump the current contents of IEAVTRML
> > > > as
> > > below
> > > > //DMPVTRML JOB 'VENKAT',CLASS=A,MSGCLASS=A,NOTIFY=&SYSUID
> > > > //STEP001 EXEC PGM=AMASPZAP
> > > > //SYSLIB DD
> > DSN=SYS1.LPALIB,DISP=SHR,VOL=SER=ZS11T1,UNIT=3390
> > > > //SYSPRINT DD SYSOUT=A
> > > > //SYSIN DD *
> > > > DUMP IGC0001C IEAVTRML
> > > > /*
> > > >
> > > > and output is below .
> > > >
> > > >
> > > > **CCHHR- 1DA9000D01 RECORD LENGTH- 000E68 MEMBER NAME
> > > > IGC0001C
> > > > CSECT NAME IEAVTRML
> > > > 000000 C5D9C2D4 C6D9C5E2 00000000 D4E5D7E3 E3D9D4D3
> > > > 00000000
> > > > C4C6E2D4 D9C3D3F0
> > > > 000020 00000000 00000000 00000000 00000000
> > > > AMA113I COMPLETED DUMP REQUIREMENTS
> > > >
> > > > AMA100I AMASPZAP PROCESSING COMPLETED
> > > >
> > > > I also tried setting up AMASPZAP utility to replace the entry
> > > > containing
> > > > DFSMRCL0 with zeros as below
> > > >
> > > >
> > > > //DMPVTRML JOB 'VENKAT',CLASS=A,MSGCLASS=A,NOTIFY=&SYSUID
> > > > //STEP001 EXEC PGM=AMASPZAP
> > > > //SYSLIB DD
> > DSN=SYS1.LPALIB,DISP=SHR,VOL=SER=ZS11T1,UNIT=3390
> > > > //SYSPRINT DD SYSOUT=A
> > > > //SYSIN DD *
> > > > NAME IGC0001C IEAVTRML
> > > > VER 0000 C5D9C2D4C6D9C5E2
> > > > VER 000C D4E5D7E3E3D9D4D3
> > > > VER 0018 C4C6E2D4D9C3D3F0
> > > > REP 0000 D4E5D7E3E3D9D4D3
> > > > REP 000C C3C1D9F2D9E2C3F0
> > > > REP 0018 0000000000000000
> > > > /*
> > > >
> > > > But I feel this JCL is not fully correct, as I just used sample
> > > > available
> > > in IBM manual,
> > > > can body help me to resolve this issue.
> > > >
> > > > Also not able to find reason of IEA303W abend 806 REASON 0000004
> > > > during initialization under RIM IEAVNPA1 ---- This module available
> > > > in
> > > SYS.NUCLEUS
> > > >
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO IBM-MAIN
>
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
