On 7/12/2015 12:51 PM, Crabtree, Anne D wrote:
IXC466I INBOUND SIGNAL CONNECTIVITY ESTABLISHED WITH SYSTEM IPO2 245
VIA DEVICE 0342 WHICH IS CONNECTED TO DEVICE 0412
IXC466I OUTBOUND SIGNAL CONNECTIVITY ESTABLISHED WITH SYSTEM IPO2 246
VIA DEVICE 0343 WHICH IS CONNECTED TO DEVICE 0413
IXC466I INBOUND SIGNAL CONNECTIVITY ESTABLISHED WITH SYSTEM IPO2 247
VIA DEVICE 0340 WHICH IS CONNECTED TO DEVICE 0410
IXC466I OUTBOUND SIGNAL CONNECTIVITY ESTABLISHED WITH SYSTEM IPO2 248
VIA DEVICE 0341 WHICH IS CONNECTED TO DEVICE 0411
PXM4704 XMANAGER PLEXGRPX GRP= MEM=
PXM4704 XMANAGER PLEXGRPX GRP= MEM=
PXM4705 XMANAGER PLEXGRPX NEW=00 OLD=00 TYPE=0B
PXM4705 XMANAGER PLEXGRPX NEW=00 OLD=00 TYPE=0B
PXM4704 XMANAGER PLEXGRPX GRP= MEM=
PXM4705 XMANAGER PLEXGRPX NEW=00 OLD=00 TYPE=0B
ISG011I SYSTEM IPO2 - JOINING GRS COMPLEX
IXC467I RESTARTING PATHIN DEVICE 0340 256
USED TO COMMUNICATE WITH SYSTEM IPO2
RSN: INTERVENTION REQUIRED
IXC467I RESTARTING PATHIN DEVICE 0342 257
USED TO COMMUNICATE WITH SYSTEM IPO2
RSN: INTERVENTION REQUIRED
IXC467I RESTARTING PATHOUT DEVICE 0341 258
USED TO COMMUNICATE WITH SYSTEM IPO2
RSN: INTERVENTION REQUIRED
IXC467I RESTARTING PATHOUT DEVICE 0343 260
USED TO COMMUNICATE WITH SYSTEM IPO2
RSN: INTERVENTION REQUIRED
*18 IXC409D SIGNAL PATHS BETWEEN IPO2 AND IPO1 ARE LOST. REPLY RETRY OR
SYSNAME=SYSNAME OF THE SYSTEM TO BE REMOVED.
CTM916W PROGRAM CTMCKP WAITING FOR CTM.CKPT 10 SEC
CTM916W PROGRAM CTMCKP WAITING FOR CTM.CKPT 70 SEC
R 18,SYSNAME=IPO2,DOWN
IEE600I REPLY TO 18 IS;SYSNAME=IPO2,DOWN
*19 IXC417D CONFIRM REQUEST TO REMOVE IPO2 FROM THE SYSPLEX. REPLY
SYSNAME=IPO2 TO REMOVE IPO2 OR C TO CANCEL.
R 19,SYSNAME=IPO2
IEE600I REPLY TO 19 IS;SYSNAME=IPO2
IXC101I SYSPLEX PARTITIONING IN PROGRESS FOR IPO2 REQUESTED BY 270
XCFAS. REASON: SYSTEM ENTERED WAIT STATE
*ISG178E GLOBAL RESOURCE SERIALIZATION HAS BEEN DISRUPTED. GLOBAL
RESOURCE REQUESTORS WILL BE SUSPENDED.
IXC808I ELEMENTS FROM TERMINATED SYSTEM IPO2 WERE NOT PROCESSED BY 272
THIS SYSTEM. ARM COUPLE DATA SET IS NOT AVAILABLE TO THIS SYSTEM.
IXC105I SYSPLEX PARTITIONING HAS COMPLETED FOR IPO2 273
- PRIMARY REASON: SYSTEM ENTERED WAIT STATE
- REASON FLAGS: 000022
ISG179I SYSTEM IPO1 INITIATED AUTO RESTART PROCESSING.
ISG175I SYSTEM IPO1 RESTARTED GLOBAL RESOURCE SERIALIZATION.
ISG011I SYSTEM IPO2 - BEING PURGED FROM GRS COMPLEX
ISG013I SYSTEM IPO2 - PURGED FROM GRS COMPLEX
Anne,
I would try to VARY 0340-0343,OFFLINE to both systems, then VARY ONLINE.
If that doesn't work, try CONFIG CHP OFF and ON (assuming that there
are no other devices you need on that CHPID). I'm thinking either one
or both of the varies may be required to clear the intervention.
Regards,
Tom Conley
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
