Here's an example
Parameters, Registers, and Variables for Active Routines:
main (DSA address 00000048082FEA20):
DOWNSTACK DSA
Saved Registers:
GPR0..... **************** GPR1..... **************** GPR2.....
***************** GPR3..... ****************
GPR4..... 00000048082FEA20 GPR5..... BBBBBBBBBBBBBBBB GPR6.....
000000001AC0E618 GPR7..... 00000048082FF2C8
GPR8..... 0000000000000005 GPR9..... 0000000000000000 GPR10....
0000000000000001 GPR11.... 0000000000000004
GPR12.... 4040404040404040 GPR13.... 4040404040404040 GPR14....
4040404040404040 GPR15.... 4040404040404040
...
GPREG STORAGE:
Storage around GPR0 is invalid.
Storage around GPR1 is invalid.
Storage around GPR2 is invalid.
Storage around GPR3 is invalid.
Storage around GPR4 (00000048082FEA20)
+0800 00000048082FF220 00000048 082FF260 00000048 08600060 |......2-..
I have XGR'd GPR2 and GPR3 before the abend and GPR5 definitely does not
contain a bunch Beees.
The program was compiled using xlc on the USS side.
The other issue I have is that the top of stack is not my main() so the PSW and
"Storage dump near condition, beginning at location" is of CEEHDSP instead of
main so I can't see what instruction in my program caused the abend.
I assume the registers are modified up stack which is why I can't see them.
Can I get the dump at the actual abend location?
Janet
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
