We just did this. Make sure you export your old OSA-ICC config from the old HMC and import it to the new one. Then use Advanced OSA functions, card specific functions, and validate and activate.
Once we had our new cable plugged in and the ICC imported and activated, we ended up having to do a power on reset to get the card to come active. One other thing, I’ve heard there was one report of a ZR1 where OSA’s wouldn’t work until the OSA cards were reseated by the IBM SSR. On Thu, Aug 9, 2018 at 2:27 AM Jake Anderson <[email protected]> wrote: > Hi > > Cross posted . > > I was able to bring up the z/OS on tht new hardware z14 successfully. > > The OSA base 1000t were plugged into the correct port as per the chpid > mapping output and also the cable was plugged into the correct switch port > > > Still the status of the OSA shows as DISABLED in HMC. I tried with reset > too but no luck. > > Anything that is missing to be checked ? > > Regards > Jake. > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
