Jeez, haven’t had my coffee yet, the subject says ICC. I’ll go back offline now!
On Thu, Aug 9, 2018 at 5:38 AM Michael Babcock <[email protected]> wrote: > I just re-read your post. No mention of ICC so ignore me! > > On Thu, Aug 9, 2018 at 5:36 AM Michael Babcock <[email protected]> > wrote: > >> We just did this. Make sure you export your old OSA-ICC config from the >> old HMC and import it to the new one. Then use Advanced OSA functions, >> card specific functions, and validate and activate. >> >> Once we had our new cable plugged in and the ICC imported and activated, >> we ended up having to do a power on reset to get the card to come active. >> >> >> One other thing, I’ve heard there was one report of a ZR1 where OSA’s >> wouldn’t work until the OSA cards were reseated by the IBM SSR. >> >> On Thu, Aug 9, 2018 at 2:27 AM Jake Anderson <[email protected]> >> wrote: >> >>> Hi >>> >>> Cross posted . >>> >>> I was able to bring up the z/OS on tht new hardware z14 successfully. >>> >>> The OSA base 1000t were plugged into the correct port as per the chpid >>> mapping output and also the cable was plugged into the correct switch >>> port >>> >>> >>> Still the status of the OSA shows as DISABLED in HMC. I tried with reset >>> too but no luck. >>> >>> Anything that is missing to be checked ? >>> >>> Regards >>> Jake. >>> >>> ---------------------------------------------------------------------- >>> For IBM-MAIN subscribe / signoff / archive access instructions, >>> send email to [email protected] with the message: INFO IBM-MAIN >>> >> ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
